Elite uPVC Series
Florida DBPR
Approved
Design Pressure +60/-60 psf
NFRC Certified
ES Windows ES-V500 uPVC Casement Window
ES Windows Elite uPVC line — thermally efficient, aluminum-reinforced vinyl windows and a sliding glass door (single hung, fixed, horizontal roller, casement, awning, and SGD) for residential FBC projects.
Elite uPVC outward-opening casement window with excellent airtightness, structural strength, superior insulation, and smooth crank operation.
Florida DBPR
Approved
Design Pressure +60/-60 psf
NFRC Certified
Built for South Florida homes
The ES-V500 is an Elite-line, thermally efficient uPVC outward-opening casement window offering excellent airtightness, structural strength, and superior insulation. It is FBC-certified with smooth crank operation and accepts 7/16" laminated and 1" insulating or insulating-laminated glass. Frame depth is 3-1/4", with a 2-3/4" sight line in flush configuration and 3-1/4" in flange. Available in flush, flange, and fin frames, pre-assembled and pre-glazed, in a white finish.
- Florida Building Code product-approved
- uPVC frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
uPVC
Max Size
40 x 80 in
Design Pressure
+60/-60 psf
U-Factor
0.75–0.77
SHGC
0.22–0.53
Visible Trans.
0.17–0.61
Sizes & Pressures
| Configuration | Min size | Max size | Design pressure |
|---|---|---|---|
| Project Out / Casement | 24 x 18 in | 40 x 80 in | +60/-60 psf |
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| Bronze | 0.77 | 0.425 | 0.39 | 14 |
| Clear | 0.765 | 0.45 | 0.56 | 14 |
| Green | 0.77 | 0.42 | 0.53 | 14 |
| Gray | 0.77 | 0.344 | 0.262 | 14 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
- FL46587.R1
Options
Related Products
More models in the Elite uPVC Series.
ES Windows ES-V200 uPVC Horizontal-Roller Window
Sliding Window
See price & specs
ES Windows ES-V400 uPVC Sliding Glass Door
Sliding Glass Door
See price & specs
ES Windows ES-V100 uPVC Single-Hung Window
Single Hung
See price & specs
ES Windows ES-V150 uPVC Fixed Window
Fixed Window
See price & specs
Ready to install the ES Windows ES-V500 uPVC Casement Window?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other casement models Armor Pro installs.
Pella
Pella Lifestyle Casement
See price & specs
PGT Custom Windows & Doors
PGT WinGuard Aluminum Casement CA740A
See price & specs
Eastern Architectural Systems
EAS 143 Casement Impact Vinyl (Bertha-Branded)
See price & specs
ECO Window Systems
Eco-Guard Casement Window Series 500
See price & specs
Frequently Asked Questions
The ES-V500 is an Elite uPVC outward-opening casement window with smooth crank operation, so the sash swings out on a hinge to catch breezes and seal tight when closed. Its excellent airtightness, structural strength, and superior insulation make it a good fit for living areas and rooms where you want strong ventilation and energy performance. We install it on FBC residential projects where a homeowner wants a reinforced vinyl casement.
No. The ES-V500 is a non-impact (NI) window and is not HVHZ-approved, so it is not the right choice for the High Velocity Hurricane Zone covering Miami-Dade and Broward counties. If you need an impact-rated, HVHZ-approved casement, we'll point you to one of ES Windows's impact lines and confirm the correct approval for your address at the time we quote.
The ES-V500 casement is available from a minimum of 24 by 18 inches up to a maximum of 40 by 80 inches, and it carries a design pressure of +60/-60 psf. The frame depth is 3-1/4 inches, with a 2-3/4-inch sight line in the flush configuration and 3-1/4 inches in flange. We'll verify the size and DP suit your opening and wind zone before ordering.
The ES-V500 accepts 7/16-inch laminated and 1-inch insulating or insulating-laminated glass, with U-factors around 0.75 to 0.77 across the laminated builds, the best of the Elite uPVC casement glass options. For solar control you can range from a clear laminated package at SHGC 0.52 down to an SB70 low-E build at SHGC 0.24 and a gray-on-gray package at SHGC 0.33. We'll match the glass to each room's exposure when we prepare the estimate.
The ES-V500 comes in a standard white finish and is offered in flange (standard), fin, and flush frame types, so we can match the install detail to your wall and rough opening. The window is aluminum-reinforced uPVC and ships pre-assembled and pre-glazed. We'll recommend the frame style that best fits your home during the consultation.
We don't quote a flat price because the installed cost of an ES-V500 depends on the window size, the glass package you choose, the frame type, and the condition of the existing opening. Because this is a non-impact window, the appropriate application and any code requirements for your location also factor in. Armor Pro provides a free, in-person estimate so you get an accurate number for your specific project.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.
ES Windows is the fenestration brand; Tecnoglass Inc. is the publicly traded parent that owns it and consolidates the glass-making, aluminum-extrusion (Alutions), and window-assembly operations under one roof. For a homeowner the practical takeaway is that a large, publicly accountable manufacturer stands behind the warranty and the product. As your installer, we handle the order, the permit, and the installation regardless of the corporate structure.
Both crank open with a handle instead of sliding. A casement is hinged on the side and swings out like a door; an awning is hinged at the top and opens outward from the bottom, so it sheds rain and can stay open in a light shower. Crank windows seal tightly when closed, which makes them strong performers for energy and weather resistance.