Elite uPVC Series
Florida DBPR
Approved
Design Pressure +60/-60 psf
NFRC Certified
ES Windows ES-V200 uPVC Horizontal-Roller Window
ES Windows Elite uPVC line — thermally efficient, aluminum-reinforced vinyl windows and a sliding glass door (single hung, fixed, horizontal roller, casement, awning, and SGD) for residential FBC projects.
Elite uPVC thermally efficient horizontal-roller window with smooth operation, low air infiltration, and multiple OX/XO/XOX configurations.
Florida DBPR
Approved
Design Pressure +60/-60 psf
NFRC Certified
Built for South Florida homes
The ES-V200 is an Elite-line, thermally efficient uPVC horizontal-roller (sliding) window engineered for smooth operation and low air infiltration. It is aluminum-reinforced and accepts 3/8" and 7/16" laminated and 1" insulating and insulating-laminated glass. Frame depth is 3-1/4" with a 2-3/16" sight line. Available in flush, flange, and fin frames; OX, XO, XOX, and unequal-XOX configurations; pre-assembled and pre-glazed; white finish.
- Florida Building Code product-approved
- uPVC frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
uPVC
Max Size
73.75 x 62 in
Design Pressure
+60/-60 psf
U-Factor
0.57–1.09
SHGC
0.17–0.6
Visible Trans.
0–0.66
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Horizontal Roller (OX/XO) | 73.75 x 62 in | +60/-60 psf |
| Horizontal Roller (XOX) | 110 x 62 in | +60/-60 psf |
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| Bronze | 0.923 | 0.473 | 0.447 | 14 |
| Clear | 0.918 | 0.518 | 0.625 | 14 |
| Green | 0.923 | 0.47 | 0.59 | 14 |
| Gray | 0.911 | 0.407 | 0.33 | 14 |
| Clear, Air | 0.63 | 0.23 | 0.49 | 15 |
| Bronze, Low-E, Air | 0.63 | 0.18 | 0.227 | 15 |
| Clear, Low-E, Air | 0.618 | 0.244 | 0.478 | 15 |
| Green, Low-E, Air | 0.63 | 0.24 | — | 15 |
| Gray, Low-E, Air | 0.63 | 0.197 | 0.28 | 15 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
- FL28670.R2
Options
Related Products
More models in the Elite uPVC Series.
Ready to install the ES Windows ES-V200 uPVC Horizontal-Roller Window?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Frequently Asked Questions
The ES-V200 is an Elite uPVC, thermally efficient horizontal-roller (sliding) window engineered for smooth operation and low air infiltration. Because the sash glides sideways, it's a practical choice for wide openings over kitchen counters, in bedrooms, or anywhere you want easy side-to-side ventilation. We install it on FBC residential projects in OX, XO, XOX, and unequal-XOX layouts.
No. The ES-V200 is a non-impact (NI) window and is not HVHZ-approved, so it is not the right window for the High Velocity Hurricane Zone covering Miami-Dade and Broward counties. If you need an impact-rated, HVHZ-approved sliding window, we'll steer you to one of ES Windows's impact lines and confirm the correct approval for your address when we quote.
In the two-panel OX or XO layout the ES-V200 is available up to 73.75 by 62 inches, and the three-panel XOX layout extends up to 110 by 62 inches, both at a design pressure of +60/-60 psf. The frame depth is 3-1/4 inches with a 2-3/16-inch sight line. We'll verify the configuration and DP work for your opening and wind zone before ordering.
The ES-V200 accepts 3/8-inch and 7/16-inch laminated as well as 1-inch insulating and insulating-laminated glass, with U-factors around 0.81 to 0.84 on the laminated builds. For solar control you can range from a clear laminated package at SHGC 0.56 down to an SB70 low-E build at SHGC 0.26 and a gray-on-gray package at SHGC 0.36. We'll match the glass to each room's exposure when we put the estimate together.
The ES-V200 comes in a standard white finish and is offered in flush (standard), flange, and fin frame types so we can match the install detail to your wall and rough opening. The window is aluminum-reinforced uPVC and ships pre-assembled and pre-glazed. We'll recommend the frame style that fits your home during the consultation.
We don't quote a flat price because the installed cost of an ES-V200 depends on the window size, whether it's a two- or three-panel layout, the glass package you choose, the frame type, and the condition of the existing opening. Because this is a non-impact window, the appropriate application and any code requirements for your location also factor in. Armor Pro provides a free, in-person estimate so you get an accurate number for your specific project.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.
ES Windows is the fenestration brand; Tecnoglass Inc. is the publicly traded parent that owns it and consolidates the glass-making, aluminum-extrusion (Alutions), and window-assembly operations under one roof. For a homeowner the practical takeaway is that a large, publicly accountable manufacturer stands behind the warranty and the product. As your installer, we handle the order, the permit, and the installation regardless of the corporate structure.
A horizontal roller opens side-to-side on a track instead of up and down. It is a practical choice for wide openings, over kitchen sinks, and anywhere a vertical sash is awkward, and it gives a large clear view with an easy one-hand operation.