Elite uPVC Series
Design Pressure +80/-80 psf
NFRC Certified
ES Windows ES-V150 uPVC Fixed Window
ES Windows Elite uPVC line — thermally efficient, aluminum-reinforced vinyl windows and a sliding glass door (single hung, fixed, horizontal roller, casement, awning, and SGD) for residential FBC projects.
Elite uPVC thermally efficient fixed window with aluminum reinforcement, FBC certification, and strong acoustic and structural performance.
Design Pressure +80/-80 psf
NFRC Certified
Built for South Florida homes
The ES-V150 is an Elite-line, thermally efficient uPVC fixed window designed to maximize daylight, thermal efficiency, and acoustic insulation. It is FBC-certified with aluminum reinforcement for solid structural performance in façade applications, accepting laminated, insulating, and insulating-laminated glass. Frame depth is 3-1/4", with a 2-11/16" sight line in flush configuration and 2-3/16" in flange. Available in flush, flange, and fin frame options, pre-assembled and pre-glazed, in a white finish.
- uPVC frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
uPVC
Max Size
59 x 47 in or 29 x 100 in
Design Pressure
+80/-80 psf
U-Factor
0.47–1.02
SHGC
0.26–0.66
Visible Trans.
0.21–0.76
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Fixed Window | 59 x 47 in or 29 x 100 in | +80/-80 psf |
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| Blue | 1.02 | 0.5 | 0.64 | 15 |
| Bronze | 0.952 | 0.54 | 0.514 | 15 |
| Clear | 0.969 | 0.499 | 0.657 | 15 |
| Green | 0.952 | 0.536 | 0.672 | 15 |
| Gray | 0.967 | 0.412 | 0.348 | 15 |
| Clear, Air | 0.47 | 0.58 | 0.65 | 40 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
Options
Related Products
More models in the Elite uPVC Series.
ES Windows ES-V200 uPVC Horizontal-Roller Window
Sliding Window
See price & specs
ES Windows ES-V400 uPVC Sliding Glass Door
Sliding Glass Door
See price & specs
ES Windows ES-V500 uPVC Casement Window
Casement
See price & specs
ES Windows ES-V100 uPVC Single-Hung Window
Single Hung
See price & specs
Ready to install the ES Windows ES-V150 uPVC Fixed Window?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other fixed window models Armor Pro installs.
Air Master
Air Master Picture Window
See price & specs
Eastern Architectural Systems
EAS 176 Bertha Picture Impact Vinyl
See price & specs
Pella
Pella Lifestyle Fixed / Picture / Specialty Shapes
See price & specs
PGT Custom Windows & Doors
PGT WinGuard Aluminum Casement Picture PW740A
See price & specs
Frequently Asked Questions
The ES-V150 is an Elite uPVC, thermally efficient fixed (non-operating) window designed to maximize daylight, thermal efficiency, and acoustic insulation. Because it doesn't open, we install it as a picture window or to fill large glass areas in a façade where ventilation isn't needed and you want a clean, energy-efficient lite. Its aluminum-reinforced frame gives it solid structural performance in façade applications.
No. The ES-V150 is a non-impact (NI) window and is not HVHZ-approved, so it is not suitable for the High Velocity Hurricane Zone covering Miami-Dade and Broward counties. If your project needs an impact-rated, HVHZ-approved fixed window, we'll point you to one of ES Windows's impact lines and confirm the right approval for your address at the time we quote.
The ES-V150 fixed configuration is available up to a maximum of 59 by 47 inches and carries a design pressure of +80/-80 psf. The frame depth is 3-1/4 inches, with a 2-11/16-inch sight line in the flush configuration and 2-3/16 inches in flange. We'll confirm the size and DP suit your opening and wind zone before placing the order.
The ES-V150 accepts laminated, insulating, and insulating-laminated glass. Laminated builds run a U-factor around 0.85, while the 1-inch insulated-laminated package with an air fill drops to a U-factor of about 0.47 with a condensation resistance of 40. For solar control you can choose from a clear laminated lite at SHGC 0.62 down to an SB70 low-E build at SHGC 0.29, and we'll match the package to each elevation when we quote.
The ES-V150 comes in a standard white finish and is offered in flush (standard), flange, and fin frame types, so we can match the install detail to your wall and rough opening. The window is aluminum-reinforced uPVC and ships pre-assembled and pre-glazed. We'll recommend the frame style that best fits your home during the consultation.
We don't quote a flat price because the installed cost of an ES-V150 depends on the window size, the glass package you choose, the frame type, and the condition of the existing opening. Since this is a non-impact window, the appropriate application and any code requirements for your location also matter. Armor Pro provides a free, in-person estimate so you get an accurate number for your specific project.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.
ES Windows is the fenestration brand; Tecnoglass Inc. is the publicly traded parent that owns it and consolidates the glass-making, aluminum-extrusion (Alutions), and window-assembly operations under one roof. For a homeowner the practical takeaway is that a large, publicly accountable manufacturer stands behind the warranty and the product. As your installer, we handle the order, the permit, and the installation regardless of the corporate structure.
A fixed (picture) window does not open — it is a sealed pane that maximizes the view and daylight. With no moving parts it is the most weather-tight and energy-efficient style, and it carries the highest design pressures, which is why it is often used for large feature openings and architectural shapes.