Elite Series
Miami-Dade NOA
Florida DBPR
Approved
HVHZ
Approved
Impact Rating LMI
Design Pressure +80/-90 psf
NFRC Certified
ES Windows Elite ES-EL200 Sliding Window
ES Windows's mid-tier aluminum impact line covering the full residential operation range.
Aluminum impact horizontal slider in XO, OX, and XOX configurations on a 2-15/16 inch frame. Polyamide rollers with needle bearings.
Miami-Dade NOA
Florida DBPR
Approved
HVHZ
Approved
Impact Rating LMI
Design Pressure +80/-90 psf
NFRC Certified
Impact protection, built for South Florida
The ES-EL200 is the Elite aluminum impact horizontal sliding window, available in XO, OX, and XOX configurations on a 2-15/16 inch frame depth. Polyamide rollers with needle bearings carry the sash smoothly under typical residential sash loads. LMI impact-rated for HVHZ installations.
- Tested & certified to Miami-Dade HVHZ hurricane standards
- Aluminum frame engineered for strength and durability
- Large-missile impact-rated laminated glass
- Energy-efficient Low-E insulated glass options to control heat gain
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Max Size
74 x 74 in or 111.625 x 74 in
Design Pressure
+80/-90 psf
U-Factor
0.62
SHGC
0.24
Visible Trans.
0–0.66
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Sliding window | 74 x 74 in or 111.625 x 74 in | +80/-90 psf |
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| 7/8" insulated laminated — 1/8" Temp + 5/16" air + 1/8" HS + 0.090 SentryGlas + 1/4" HS (LMI/SMI) | 0.627 | 0.211 | 0.32 | 15 |
| 13/16" insulated laminated — 1/8" Temp + 3/8" air + 1/8" HS + 0.090 SentryGlas + 1/8" HS (LMI/SMI) | 0.627 | 0.211 | 0.32 | 15 |
| 7/16" laminated — 1/8" HS + 0.090 SentryGlas + 1/4" HS (LMI/SMI) | 0.917 | 0.463 | 0.483 | 14 |
| 5/16" laminated — 1/8" HS + 0.090 SentryGlas + 1/8" HS (LMI/SMI) | 0.917 | 0.463 | 0.483 | 14 |
| 7/8" insulated laminated (1/4" HS lites) — 1/4" Temp + 5/16" air + 1/8" HS + 0.090 SentryGlas + 1/8" HS (LMI/SMI) | 0.627 | 0.211 | 0.32 | 15 |
| 7/16" laminated (1/4" + 1/8" lites) — 1/4" HS + 0.090 interlayer + 1/8" HS (LMI/SMI) | 0.917 | 0.463 | 0.483 | 14 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
- 23-0714.18 exp. 2027
- FL28670.R2
Options
Related Products
More models in the Elite Series.
Ready to install the ES Windows Elite ES-EL200 Sliding Window?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other horizontal roller models Armor Pro installs.
PGT Custom Windows & Doors
PGT WinGuard Aluminum Horizontal Roller HR7710A
See price & specs
Eastern Architectural Systems
EAS 176 Bertha Horizontal Roller Impact Vinyl
See price & specs
ECO Window Systems
Eco-Guard Horizontal Rolling Series 200
See price & specs
Eurocraft
Eurocraft EC-300 Horizontal Slider Window
See price & specs
Frequently Asked Questions
The ES-EL200 is the Elite aluminum impact horizontal sliding window, built on a 2-15/16 inch frame depth and available in XO, OX, and XOX configurations (one operable sash sliding past a fixed lite, or a center-fixed three-lite layout). A horizontal slider glides side to side, so it is easy to operate over counters and in wide openings. We install the ES-EL200 on South Florida homes where you want a hurricane-rated slider with HVHZ certification at the Elite line's mid-tier pricing.
Yes. The ES-EL200 is Large Missile Impact (LMI) rated and carries Miami-Dade NOA 23-0714.18, which is valid for the High-Velocity Hurricane Zone covering Miami-Dade and Broward counties. That NOA is listed as expiring January 19, 2027, and we confirm the current approval on file at the time of your permit. As your installer, we make sure the ES-EL200's approval matches your jurisdiction's requirements.
The ES-EL200 installs up to a maximum of 74 by 74 inches and is rated to a design pressure of +80/-90 psf, which is the wind load the unit is built to resist. The window is tested to a water resistance of 10 psf. Because the design pressure your opening must reach depends on its size and wind exposure, we confirm the rating your specific window needs at quote, and on wide XOX units a meeting-stile reinforcement option is available for added strength.
The ES-EL200 is offered in laminated and insulated-laminated make-ups built around a 0.090 SentryGlas interlayer, from a 5/16-inch laminated unit up to 7/8-inch insulated-laminated packages, all carrying LMI/SMI impact ratings. Its insulated-laminated glass is rated at a U-factor of 0.57, SHGC of 0.30, visible transmittance of 0.49, and a condensation resistance of 15. Across the line the slider is published at an SHGC of about 0.24 with U-factors from roughly 0.62 to 1.0, and NFRC certification for the Elite line is issued through Kahuna Construction Inc.
The ES-EL200 runs on polyamide rollers with needle bearings, which carry the sash smoothly under typical residential loads for easy day-to-day operation. Standard hardware includes a vent latch (SK08-4010), with an optional SL320 sweep lock and reinforced meeting stiles available. It can be ordered with flange frames, flange frames with a flush adapter, or flange frames with a fin adapter, and with or without a sill riser, and we will go over those options so the slider fits your opening correctly.
Installed pricing for the ES-EL200 depends on the size of the opening, the XO, OX, or XOX configuration, the glass package, the frame and sill options, and the condition of the existing opening, so there is no single price. The Elite line is positioned to deliver HVHZ-rated Miami-Dade certification without architectural-grade pricing, and as your installer Armor Pro handles measurement, permitting, and code-compliant installation. Contact us for a free, no-obligation estimate and we will measure your openings and quote the ES-EL200.
Yes. Elite is ES Windows's mid-tier aluminum impact line and carries current Miami-Dade NOAs filed under the 2023 (8th edition) Florida Building Code across its operation range, so it is HVHZ-eligible in Miami-Dade and Broward. We confirm the exact approval and design pressure for each opening before ordering.
Elite spans the full standard residential range: casement, single hung, fixed picture, sliding window, French door, and sliding glass door, all under one certified system. That breadth is why it shows up on so many quotes; a whole house can be specified on a single line. What it does not include are the architectural pivot and folding doors, which live in the Prestige tier.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.