Vista Series
Design Pressure +50/-50 psf
Energy
Made in USA
Pella Vista Aluminum Casement
Pella's premium aluminum line with ultra-thin profiles and expansive glass.
Premium aluminum casement reaching up to 10 feet of sash height, one of the largest operable aluminum casements available in residential.
Design Pressure +50/-50 psf
Energy
Made in USA
Frame finish
Built for South Florida homes
The Vista Casement is Pella's premium aluminum casement window, supporting maximum sash heights up to 10 feet for floor-to-ceiling residential installations. One of the largest operable aluminum casements available in the residential market.
- Aluminum frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Grille Patterns
Grille Styles
SDL Exterior 7/8" Beveled or FlatSDL Interior 7/8" FlatGBG 5/8" FlatGBG 11/16" Contoured
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Max Size
47.25 x 119.25 in
Design Pressure
+50/-50 psf
U-Factor
0.25–0.38
SHGC
0.12–0.46
Visible Trans.
0.24–0.54
Sizes & Pressures
| Configuration | Min size | Max size | Design pressure |
|---|---|---|---|
| Vista Series Premium Aluminum Casement (Vent) | 17.25 x 23.25 in | 47.25 x 119.25 in | +50/-50 psf |
| Vista Series Premium Aluminum Casement (Fixed Picture) | 17.25 x 23.25 in | 119.25 x 119.25 in | +50/-50 psf |
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| 1" Advanced Low-E (air) | 0.37 | 0.29 | 0.49 | 59 |
| 1" Advanced Low-E w/Argon | 0.34 | 0.29 | 0.49 | 62 |
| 1" SunDefense Low-E w/Argon | 0.34 | 0.2 | 0.44 | 62 |
| 1" SunDefense+ Low-E w/Argon | 0.3 | 0.19 | 0.43 | 50 |
| 1" NaturalSun Low-E w/Argon | 0.35 | 0.46 | 0.54 | 61 |
| 1" SunDefense Laminated 0.030 (argon) | 0.33 | 0.2 | 0.44 | 63 |
| 1" Insulated Low-E 340 w/Argon | 0.34 | 0.13 | 0.26 | 62 |
Performance Certifications
Energy-performance data on file (manufacturer-published; not third-party certified).
Options
Ready to install the Pella Vista Aluminum Casement?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other casement models Armor Pro installs.
PGT Custom Windows & Doors
PGT WinGuard Aluminum Casement CA740A
See price & specs
Eastern Architectural Systems
EAS 143 Casement Impact Vinyl (Bertha-Branded)
See price & specs
ECO Window Systems
Eco-Guard Casement Window Series 500
See price & specs
ES Windows
ES Windows Elite ES-5000 Casement
See price & specs
Frequently Asked Questions
The Vista Casement is Pella's premium aluminum casement window that supports maximum sash heights up to 10 feet, making it one of the largest operable aluminum casements available in the residential market. It comes in a vent (operable) and a fixed picture configuration on Vista's ultra-thin aluminum sightlines. We install it on modern South Florida homes that want tall, floor-to-ceiling glass that still cranks open for ventilation.
No. The Vista Casement is part of Pella's premium aluminum architectural line, not its impact line, so it isn't what we'd permit inside the Miami-Dade and Broward High-Velocity Hurricane Zone. If you want the same modern wall-of-glass look with a hurricane rating, we'll direct you to Pella's HVHZ-rated impact products. As your installer, we'll confirm what your opening and jurisdiction require before we quote.
The vent (operable) Vista Casement runs from a minimum of 17.25 by 23.25 inches up to a maximum of 47.25 by 119.25 inches, which is just under 10 feet of sash height. The fixed picture version reaches up to 119.25 by 119.25 inches. We'll confirm the exact maximum that applies to your opening and chosen configuration at the time of quote.
The Vista Casement is tested to a design pressure of +50/-50 psf in both the vent and fixed picture configurations. Design pressure is the wind load the unit is built to resist, and the figure your opening must meet depends on its size, height, and exposure. Since Vista is a non-impact line, we'll confirm at quote whether your opening also needs an HVHZ-rated impact product for code compliance.
Glass options range from Advanced Low-E up to laminated and triple-insulated Low-E units, with U-factors from 0.25 to 0.38 and SHGC from 0.12 to 0.46; for instance the Insulated Low-E 340 with argon hits a 0.13 SHGC for heavy sun. Frame finishes include 6 standard anodized colors (AAMA 611 Class 1), 71 standard paint colors (AAMA 2605), and custom paint, with interior and exterior able to be color-matched. We'll help you choose the glass and finish that fit your home and the Florida climate.
The Vista Casement comes standard with a nested crank handle and a concealed locking system, with optional Seacoast hardware for coastal corrosion resistance and a Window Opening Control Device. It can be ordered with a retractable, flexible screen. We'll review the hardware and screen choices with you so the casement suits your location and how you plan to use it.
No. Vista is Pella's premium aluminum line built for ultra-thin sightlines and walls of glass, but it is a non-impact, non-HVHZ product. The multi-slide door carries a Florida state-level approval, not a Miami-Dade NOA, and the line does not claim large-missile impact. For an HVHZ address that needs impact glazing, Vista on its own won't pass; the Pella impact answer is HurricaneShield or Reserve Impact. We confirm impact and design-pressure requirements per opening and jurisdiction before specifying it.
Vista is thermally-broken aluminum aimed at high-design projects, the line a designer reaches for when the elevation is mostly glass and the frame is supposed to disappear. The catalog runs nine configurations, including a pivot door, a multi-slide reaching up to ten panels, and casements up to ten feet tall for floor-to-ceiling openings. The thin profiles are possible precisely because it isn't carrying impact glass, which needs more frame mass to hold large-missile load.
Pella Corporation is a family-owned national manufacturer headquartered in Pella, Iowa, founded in 1925 and now spanning more than 20 plants across the country. For the Florida hurricane market the important detail is that Pella's impact lines, HurricaneShield and Defender, are built in Ocala, Florida by Pella's CWS subsidiary, so the storm products are made in-state rather than shipped in. We install and service Pella across South Florida and handle the order, permit, and installation regardless of which plant a given product comes from.