Pella Vista Aluminum Direct-Set (Fixed)

No. Vista is Pella's premium aluminum architectural line rather than its impact line, so the Vista Direct-Set is not what we'd permit inside the High-Velocity Hurricane Zone. If you want the same slim-framed fixed-glass look with a hurricane rating, we'll point you to Pella's HVHZ-rated impact products. As your installer, we'll confirm what your opening and jurisdiction require before quoting.

The Vista Direct-Set installs from a minimum of 12 by 12 inches up to a maximum of 100 by 143.25 inches, which is roughly an 8-by-12-foot pane for true feature-wall glass. Because it's fixed, it can reach those large sizes while keeping ultra-thin sightlines. We'll confirm the exact maximum that fits your opening at the time of quote.

The Vista Direct-Set is tested across a wide design-pressure range of +25/-25 up to +100/-100 psf depending on size, the highest in the Vista line because it's a fixed unit. Its water resistance is rated from 6.05 up to 12 psf against wind-driven rain. Design pressure is the wind load the unit is built to resist, and we'll confirm the rating your specific opening must meet at quote.

The Vista Direct-Set's glass options span a U-factor of 0.17 to 0.34 and an SHGC of 0.15 to 0.58, with visible transmittance from 0.30 to 0.69. The low end of the SHGC range gives strong solar-heat control for big sun-facing panes, while the higher VT options maximize daylight. We'll help you choose the Low-E package that balances heat gain and brightness on a large fixed window.

Installed pricing depends on the size, the glass package, the frame finish, and the condition of the existing opening, so a large feature-wall pane will cost more than a small fixed unit. Vista is a premium architect-channel aluminum line, and as your installer Armor Pro handles measurement, ordering, and installation. Contact us for a free, no-obligation estimate and we'll measure your openings and quote the Vista Direct-Set.

No. Vista is Pella's premium aluminum line built for ultra-thin sightlines and walls of glass, but it is a non-impact, non-HVHZ product. The multi-slide door carries a Florida state-level approval, not a Miami-Dade NOA, and the line does not claim large-missile impact. For an HVHZ address that needs impact glazing, Vista on its own won't pass; the Pella impact answer is HurricaneShield or Reserve Impact. We confirm impact and design-pressure requirements per opening and jurisdiction before specifying it.

Vista is thermally-broken aluminum aimed at high-design projects, the line a designer reaches for when the elevation is mostly glass and the frame is supposed to disappear. The catalog runs nine configurations, including a pivot door, a multi-slide reaching up to ten panels, and casements up to ten feet tall for floor-to-ceiling openings. The thin profiles are possible precisely because it isn't carrying impact glass, which needs more frame mass to hold large-missile load.

Pella Corporation is a family-owned national manufacturer headquartered in Pella, Iowa, founded in 1925 and now spanning more than 20 plants across the country. For the Florida hurricane market the important detail is that Pella's impact lines, HurricaneShield and Defender, are built in Ocala, Florida by Pella's CWS subsidiary, so the storm products are made in-state rather than shipped in. We install and service Pella across South Florida and handle the order, permit, and installation regardless of which plant a given product comes from.