ES Windows ES-50 Swing Door

A single-acting ES-50 reaches a maximum size of 42 by 108 inches at a +50/-50 psf design pressure, while a double-door single-acting ES-50 reaches 94 by 120 inches at +30/-30 psf. Because the design pressure your opening must meet depends on its size and wind exposure, we verify the rating your specific door must reach at quote. We'll make sure the ES-50's configuration and rating fit your project before we order.

The ES-50 is an aluminum commercial swing door, and its published specs do not list a Large Missile Impact rating or an HVHZ approval, so we do not present it as a High-Velocity Hurricane Zone impact door for Miami-Dade or Broward exterior openings. If you need a hurricane-rated entrance, we'll point you to ES Windows's HVHZ-certified impact systems instead. We always confirm what your specific address and jurisdiction require before permitting.

The ES-50 can be glazed with either a 1-inch insulating unit, built as 1/4-inch heat-strengthened glass, a 1/2-inch air spacer, and 1/4-inch heat-strengthened glass, or with 1/4-inch monolithic heat-strengthened glass. Its glass package is listed at a U-factor of 0.63. We'll help you choose between the insulating and monolithic glazing based on the energy performance your project needs.

The ES-50 is offered in anodized, painted, and wood-grain frame finishes as standard, so it can match the look of a commercial entrance or building facade. As an aluminum door, it pairs naturally with ES Windows storefront systems for a consistent appearance. We'll show you the finish options and confirm the selection before we order.

Installed pricing for the ES-50 depends on whether you choose a single or double-door configuration, the size, the glazing package, the finish, and the condition of the existing opening, so there is no single price. As your installer, Armor Pro handles measurement, permitting, and code-compliant installation of the ES-50. Contact us for a free, no-obligation estimate and we'll measure your opening and quote it.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.