Eurocraft
Florida DBPR
Approved
Impact Rating LMI/SMI
Design Pressure +100/-100 psf
NFRC Certified
Made in Florida
Eurocraft EC-650 Outswing Door
Aluminum impact outswing entrance door with ADA-compliant bottom rail configurations (4.5-inch and 8-inch). FL #39881, LMI+SMI at 100 psf for HVHZ.
Florida DBPR
Approved
Impact Rating LMI/SMI
Design Pressure +100/-100 psf
NFRC Certified
Made in Florida
Frame finish
Glass
Impact protection, built for South Florida
The EC-650 is Eurocraft's aluminum outswing entrance door, with ADA-compliant bottom rail configurations in 4.5-inch and 8-inch heights. Florida Product Approval (FL #39881) certifies the EC-650 at 100 psf design pressure with LMI and SMI impact ratings, sized for residential and commercial entrance openings.
- Florida Building Code product-approved
- Aluminum frame engineered for strength and durability
- impact-rated laminated glass
- Energy-efficient Low-E insulated glass options to control heat gain
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Max Size
42 in
Design Pressure
+100/-100 psf
U-Factor
0.84–1.09
SHGC
0.15–0.44
Visible Trans.
0.15–0.45
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Single (X) | 42 in | +100/-100 psf |
| Double (XX) | 84 in | +100/-100 psf |
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| 7/16" laminated (PVB) | 1.09 | 0.285 | 0.287 | 16 |
| 9/16" laminated (PVB/SG) | 1.09 | 0.285 | 0.287 | 16 |
| 1-3/16" insulated laminated | 0.84 | 0.248 | 0.262 | 19 |
Performance Certifications
- FL39881.R2
Options
Ready to install the Eurocraft EC-650 Outswing Door?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other entry door models Armor Pro installs.
Frequently Asked Questions
The EC-650 is Eurocraft's aluminum impact outswing entrance door, sized for both residential and commercial entrance openings. It's an outswing-only configuration with ADA-compliant bottom rail options, which makes it a fit for entrances that need accessible thresholds. We install it where a project wants a Florida-approved aluminum entry door that swings outward.
Yes. The EC-650 offers ADA-compliant bottom rail configurations in 4.5-inch and 8-inch heights, so it can meet accessibility requirements at both residential and commercial entrances. We'll confirm which bottom rail configuration fits your entrance and code requirements when we plan the install.
Yes. The EC-650 carries Florida Product Approval FL #39881 with LMI and SMI impact ratings, qualifying it for High-Velocity Hurricane Zone installations in Miami-Dade and Broward. It's certified at 100 psf design pressure. We'll confirm the exact approval and rating for your entrance at the time of quote.
The EC-650 is available as a single (X) door up to 42 inches wide and a double (XX) door up to 84 inches wide, with a maximum panel height of 120 inches. Both configurations carry a design pressure of +100/-100 psf. We'll verify the size and rating for your specific opening before installation.
The EC-650 offers 7/16-inch and 9/16-inch laminated PVB/SentryGlas glazing, both rated U-factor 1.09, SHGC 0.44, VT 0.45, plus a 1-3/16-inch insulated laminated package at U-factor 0.84, SHGC 0.38, VT 0.40 for better thermal performance. The insulated unit uses heat-strengthened glass with a 0.090-inch Trosifol PVB interlayer by Kuraray America and a tempered outer lite. We'll help you pick the package that fits your energy goals and opening.
Installed pricing for the EC-650 depends on whether you need a single or double door, the bottom rail and glass package you choose, and the condition of the existing opening. Because it's an aluminum impact outswing door with ADA rail options, the right build varies by project. Armor Pro provides a free estimate after measuring the opening and confirming the design pressure your location requires.
Eurocraft USA is an independent, family-owned manufacturer based in the Miami area, run by the Mujica family with more than 30 years building impact windows and doors. Unlike many Florida brands that are owned by larger national groups, Eurocraft is its own company. It builds an aluminum impact line and a European-style uPVC line, all certified for Florida. Armor Pro installs and services Eurocraft across Miami-Dade, Broward, and Palm Beach.
Eurocraft's aluminum side is its EC series, covering the standard Florida operation styles: fixed and architectural-shape windows (EC-100), single hung (EC-200), horizontal sliders (EC-300), casement and awning (EC-700), commercial storefront (EC-500), plus aluminum sliding glass doors (EC-400 and EC-450), a commercial French door (EC-600), and an outswing entry door (EC-650). Alongside that it builds a European-style uPVC line, a fixed window, a tilt-and-turn window, a French/swing door, and the Premidoor 88 lift-and-slide. We help you pick the series that fits each opening rather than steering you to one product.
A swing door is hinged and opens in or out — a French door is a glazed door (often in pairs), while an entry door is the main door to the home. The impact versions use laminated glass and reinforced frames and hardware tested to the HVHZ standard, protecting the opening against debris and forced entry.