Fortify Series

CWS Fortify 330 Aluminum Fixed (Picture)

CWS's coastal-rated aluminum non-impact line, engineered for high design pressures.

Fortify aluminum non-impact fixed picture window for up to five-story residential construction. Single approval covers both flange and fin frame configurations.

Design Pressure +40/-75 psf Florida Made in Florida

Built for South Florida homes

The CWS-330 is the Fortify aluminum non-impact fixed picture window, maximizing daylight and view without operating hardware. Approved for up to five-story residential construction across the Florida Building Code, available in both flange (new-construction) and fin (replacement) frame configurations under the same approval.

  • Florida Building Code product-approved
  • Aluminum frame engineered for strength and durability
  • Energy-efficient Low-E insulated glass options to control heat gain
  • Corrosion-resistant finishes for coastal applications
  • Professionally installed across South Florida by Armor Pro
Configurations X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Fixed Frame
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship

At a Glance

Frame Material Aluminum
Max Size 156 x 156 in
Design Pressure +40/-75 psf
U-Factor 1.09
SHGC 0.31–0.81
Visible Trans. 0.08–0.84

Sizes & Pressures

Configuration Min size Max size Design pressure
Fixed Frame 12 x 12 in 156 x 156 in +40/-75 psf

Sizes shown are actual DLO frame size.

Glass & Energy Performance

Glass packageU-FactorSHGC VT CR
Blue1.090.51 0.67 10
Bronze1.090.457 0.3 10
Clear1.090.79 0.83 10
Green1.090.58 0.72 10
Gray1.090.442 0.252 10

U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.

Performance Certifications

Miami-Dade County Product Control Approved Florida Building Code Product Approval NFRC Certified energy ratings
  • Miami-Dade NOA 25-0612.05 exp. 2028
  • Miami-Dade NOA 24-0116.18
  • FL DBPR FL46528.R1

Frequently Asked Questions

The CWS-330 is the Fortify aluminum fixed picture window, designed to maximize daylight and view with no operating hardware. It's approved for up to five-story residential construction across the Florida Building Code, making it a good fit for large fixed openings, transoms, and view walls. We install it alongside operable Fortify windows so the elevation has a consistent aluminum look.

No, the CWS-330 is an aluminum non-impact fixed picture window, so it is not approved for the High Velocity Hurricane Zone (Miami-Dade and Broward) on its own. It is built for high design-pressure coastal performance without the cost of impact glazing. If your opening requires impact protection, we'll review the right approach during your free estimate.

The Fortify 330 fixed window is offered from 12 by 12 inches up to a maximum of 156 by 156 inches, with a design pressure rating of +40/-75 psf. That very large maximum size lets it serve as a true picture or view window. We confirm the exact size and the design pressure your opening needs before ordering.

The CWS-330 offers a wide glass selection including clear, bronze, gray, solar-control (SC) gray and bronze, GrayliteII, Solexia green, and Azuria blue in various thicknesses. SHGC ranges widely with tint, from about 0.81 on 1/8-inch clear down to roughly 0.34 on 1/4-inch GrayliteII, so darker solar-control tints reject more heat. We'll help you pick a tint that balances view, glare, and heat gain for your exposure.

The CWS-330 uses a non-thermally-broken aluminum frame, and across all glass options it carries a U-factor of 1.09 with a condensation resistance (CR) rating of 10. Because the heat transfer is driven by the aluminum frame and single-glaze options, you'd choose a solar-control tint to manage heat gain rather than relying on insulation. We'll explain the tradeoffs so you set the right expectations for an aluminum non-impact picture window.

Yes, the CWS-330 is documented under Miami-Dade NOA 24-0116.18 and NOA 25-0612.05, and a single approval covers both the flange (new-construction) and fin (replacement) frame configurations. Note these are design-pressure NOAs for a non-impact window, not impact (large-missile) approvals for the HVHZ. We provide the applicable NOA on your quote for permitting.

No. Fortify is aluminum non-impact, engineered for coastal addresses that need high design-pressure performance and corrosion resistance but where the code does not actually require impact glass. It is the step between Comfort Shield vinyl non-impact and the impact Hurricane Guard line. If your opening must carry impact glazing on its own, we'd move you to Hurricane Guard instead.

Only in a limited way. The 380 sliding glass door is HVHZ-eligible when it is paired with hurricane shutters, which satisfy the opening-protection requirement in place of impact glass. The Fortify windows are not HVHZ products. So in Miami-Dade or Broward, Fortify only works on a shuttered door application, and we confirm that path before specifying it.

CWS (Custom Window Systems) is a Florida manufacturer founded in 1986 and headquartered in Ocala, with additional plants in Miami, Medley, and Jacksonville totaling more than 700,000 square feet. Because the line is engineered and built in Florida around the state's hurricane code, the products are designed for our climate rather than adapted to it. We install and service CWS products throughout South Florida.

Protect your home with Armor Pro Windows & Doors!

Call (954) 231-7164 or Get Started Online with a Free Estimate!