Air Master Division Insert Italic Door

No. The Division Insert Italic is not HVHZ-approved, so it cannot be installed in High-Velocity Hurricane Zone jurisdictions such as Miami-Dade and Broward on its own. In Air Master's swing-out door family, the Full Glass Continental is the Florida Product Approval door (FL #20477, rated to 75 psf), which is the alternative we'd recommend if you need a code-approved entrance door for an HVHZ opening. We'll review which door fits your location at quote.

The Division Insert Italic uses a decorative Italic-profile louver sub-window for a more ornamental, Caribbean-styled look, while the Division Insert Master Guard and Complete Insert Master Guard use Master Guard louvers. The Complete Insert runs a full-height louver the length of the panel, whereas the Division inserts use an embedded sub-window. We can show you the styles side by side so you can pick the look you prefer.

Yes. The embedded Italic-profile jalousie is an operable sub-window, so you can open the louver to ventilate through the door while the main panel stays closed and secured. That makes it a good fit for entries where you want steady airflow without opening the whole door. We can demonstrate how the insert operates when we go over your project.

The Division Insert Italic is built with an aluminum frame, like the rest of Air Master's swing-out and entrance door family. Air Master's frame gauges in this line run from 0.041 inch on the standard Caribbean-market doors up to 0.080 inch on the heavier Full Glass Continental. We confirm the build details for your door at quote.

We don't quote a flat price because installed cost depends on the door size, the configuration, the frame finish, and the condition of the existing opening. The Division Insert Italic is part of Air Master's swing-out and entrance door family with its decorative louver insert. Armor Pro provides a free, no-obligation estimate after measuring your opening so the price reflects your actual project.

The Full Glass Continental is the one entrance door in this family with Florida Product Approval (FL #20477), rated to 75 psf positive and negative design pressure. It's a full-glass aluminum entrance door built on a heavy 0.080-inch frame gauge, roughly double the wall thickness of the standard Caribbean-market doors. The other six swing-out doors are Puerto Rico-market styles without Florida certification, so the Continental is the door we install on Florida projects.

The Full Glass Continental carries statewide Florida Product Approval but not a Miami-Dade NOA, so it is not certified for the High-Velocity Hurricane Zone that covers Miami-Dade and Broward. For an entrance door in those counties, we'd specify an HVHZ-approved door from our catalog instead. Outside the HVHZ, the Continental is a certified, code-compliant install. We check your county's requirement and pull the matching approval before we permit the job.

Yes, but only on specific products. Air Master's Series 250 aluminum line — fixed window, horizontal-slider window, sliding glass door, and swinging door — carries a Miami-Dade Notice of Acceptance (NOA) and is rated for the High-Velocity Hurricane Zone that covers Miami-Dade and Broward counties. The rest of the residential catalog carries statewide Florida Product Approval, which is accepted across most of Florida but not inside the HVHZ. We confirm the right product for your county before we quote.