Aluminum Doors
Impact Rating LMI
Design Pressure +60/-60 psf
NFRC Certified
Made in Florida
EAS 7000 Aluminum Multi-Track / Pocketing SGD
EAS's aluminum door family spanning value to premium sliding glass doors plus French doors.
Mid-tier aluminum impact sliding door with multi-track and pocketing capability for full-aperture indoor-outdoor transitions. Stainless housing, reversible interlocks.
Impact Rating LMI
Design Pressure +60/-60 psf
NFRC Certified
Made in Florida
Eastern Architectural Systems
Product photography coming soon
Frame finish
White
Bronze
Custom
Impact protection, built for South Florida
The EAS 7000 is the mid-tier aluminum impact sliding glass door with multi-track and pocketing capability, opening to stow inside a wall pocket for full-aperture indoor-outdoor transitions. Stainless-steel housing with nylon roller hardware, reversible interlocks, and 2-point locking. The aluminum counterpart to the 650 multi-track pocket vinyl SGD, LMI impact-rated for HVHZ installations.
- Aluminum frame engineered for strength and durability
- Large-missile impact-rated laminated glass
- Energy-efficient Low-E insulated glass options to control heat gain
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Grille Patterns
Grille Styles
Flat muntin
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Max Size
384 x 96 in
Design Pressure
+60/-60 psf
U-Factor
0.72
SHGC
0.34–0.55
Visible Trans.
0.19–0.6
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Bypass sliding glass door (1-8 panels) | 384 x 96 in | +60/-60 psf |
Bypass, 1-8 panels w/ or w/out pockets.
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT |
|---|---|---|---|
| Clear/Clear Lami (5mm|090PVB|5mm) 7/16" | 1.03 | 0.58 | 0.66 |
| E366/Clear Lami (5mm|090PVB|5mm) 7/16" | 1.04 | 0.28 | 0.45 |
| E366/Gray Lami (5mm|090PVB|5mm) 7/16" | 1.04 | 0.23 | 0.26 |
| E340/Clear Lami (5mm|090PVB|5mm) 7/16" | 1.04 | 0.23 | 0.28 |
| Clear / ARG90 / Clear Lami (5mm/5mm|090PVB|5mm) 1" | 0.71 | 0.54 | 0.6 |
| E366 / ARG90 / Clear Lami (5mm/5mm|090PVB|5mm) 1" | 0.58 | 0.22 | 0.47 |
| E366 / ARG90 / Gray Lami (5mm/5mm|090PVB|5mm) 1" | 0.58 | 0.21 | 0.26 |
| E340 / ARG90 / Clear Lami (5mm/5mm|090PVB|5mm) 1" | 0.58 | 0.15 | 0.28 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
Options
Ready to install the EAS 7000 Aluminum Multi-Track / Pocketing SGD?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other sliding glass door models Armor Pro installs.
PGT Custom Windows & Doors
PGT WinGuard Aluminum SGD770A Sliding Glass Door
See price & specs
ES Windows
ES Windows Prestige ES-45T Sliding Glass Door (TB)
See price & specs
ECO Window Systems
Eco-Guard Sliding Glass Door Series 700
See price & specs
Eurocraft
Eurocraft EC-400 Casement Door / Sliding Glass Door
See price & specs
Frequently Asked Questions
The EAS 7000 is Eastern Architectural Systems' mid-tier aluminum impact sliding glass door with multi-track and pocketing capability, meaning the panels can stow inside a wall pocket to open the full aperture for a seamless indoor-outdoor transition. It's the aluminum counterpart to the vinyl 650 multi-track pocket door. We install the 7000 when you want a wide patio opening that essentially disappears into the wall on an aluminum frame.
Yes. The EAS 7000 carries Large Missile Impact (LMI) certification and is HVHZ-approved, so it's a true impact door suitable for South Florida coastal installations in the High-Velocity Hurricane Zone. We'll confirm the specific approval and rating for your jurisdiction and opening when we quote the job.
The 7000 is available in bypass configurations from 1 to 8 panels, up to 384 inches (32 feet) wide by 96 inches (8 feet) tall, rated to +60/-60 psf design pressure. That makes it a good fit for full-wall patio openings where you want the panels to pocket away. We measure your rough opening and confirm the panel count and design pressure your project requires before ordering.
The 7000 runs from a 7/16-inch laminated impact package to a 1-inch insulated laminated build with argon. The most efficient option, E340 with argon and clear laminated glass, reaches a U-factor of 0.58 and a 0.15 SHGC, while the standard clear laminated 7/16-inch package sits at U 1.03 with a 0.58 SHGC. We'll help you pick the glass that balances energy performance, glare, and budget for your exposure.
The 7000 comes in White (standard) or Bronze aluminum, with grid options including flat muntin, Colonial, Prairie, and Perimeter. Standard hardware includes a dual mortise lock with anti-slam device, adjustable dual cams, an anodized track pan with snap-on cover, and a stainless-steel housing with nylon rollers and reversible interlocks. A secondary lock and stainless-steel roller are available as upgrades.
We don't quote a flat price because installed cost depends on the width and panel count, the glass package you choose, and the condition of your opening, and pocketing doors require a wall pocket that affects scope. The 7000 is EAS's mid-tier aluminum slider, positioned below the premium FD 8100 and above the budget 6000. Armor Pro provides a free, no-obligation estimate after measuring your opening.
Four products on one aluminum extrusion platform: the value-tier 6000 sliding glass door, the multi-track pocketing 7000, the premium dual-tandem-roller FD 8100, and the 5000 French (hinged) door. Building them on a shared platform means a project can keep finish and hardware consistent across every door opening. All four are impact-rated for South Florida.
Yes. Every door in the aluminum line is impact-rated and carries statewide Florida Product Approval with an HVHZ-approved designation under the Florida Building Code, the certification required for the High-Velocity Hurricane Zone. EAS uses the FBC approval route rather than a separate Miami-Dade NOA; that FBC HVHZ approval is accepted in Miami-Dade and Broward. If a project's spec specifically requires an NOA citation, we will flag it, since EAS does not file those.
Eastern Architectural Systems (EAS) is a Florida manufacturer based in Fort Myers, with roots in the Eastern Metal Supply family. It builds vinyl and aluminum impact-resistant windows and doors for the Florida residential market, and is the maker of the Bertha impact line. EAS has been part of Cornerstone Building Brands since late 2023, though it still operates under its own brand. We install and service EAS products throughout South Florida.