143 Series Vinyl
Florida DBPR
Approved
Design Pressure +50/-50 psf
NFRC Certified
Made in Florida
EAS 143 Series Horizontal Roller Vinyl
EAS's volume-tier vinyl window family with a 3-1/4 inch fusion-welded frame.
Vinyl horizontal roller on the 143 Series frame, opening side-to-side for wider sash configurations than single-hung allows. Non-HVHZ Florida.
Florida DBPR
Approved
Design Pressure +50/-50 psf
NFRC Certified
Made in Florida
Frame finish
White
Desert Sand
Custom
Built for South Florida homes
The 143 HR is EAS's vinyl horizontal roller window in the 143 Series, opening side-to-side for wider sash configurations than single-hung allows. Built on the fusion-welded vinyl frame platform at 50 psf design pressure for non-HVHZ Florida installations.
- Florida Building Code product-approved
- Vinyl frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Grille Patterns
Grille Styles
Grids Between Glass (GBG)Simulated Divided Light (SDL)
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Vinyl
Max Size
71.5 x 59.5 in
Design Pressure
+50/-50 psf
U-Factor
0.3–0.47
SHGC
0.14–0.59
Visible Trans.
0.18–0.63
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| 2-lite horizontal roller — Flange | 71.5 x 59.5 in | +50/-50 psf |
Flange.
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT |
|---|---|---|---|
| Clear / arg90 / clear (DS/DS) - 3/4" IG | 0.45 | 0.59 | 0.63 |
| E366 / arg90 / clear (DS/DS) - 3/4" IG | 0.3 | 0.22 | 0.5 |
| E366 / arg90 / Solargray (DS/DS) - 3/4" IG | 0.3 | 0.21 | 0.33 |
| E340 / arg90 / clear (DS/DS) - 3/4" IG | 0.31 | 0.14 | 0.3 |
| Clear / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.47 | 0.56 | 0.62 |
| E366 / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.34 | 0.22 | 0.49 |
| E366 / arg90 / Solargray-lami (DS/DS|090PVB|DS) - 3/4" IG | 0.34 | 0.2 | 0.34 |
| E340 / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.35 | 0.15 | 0.3 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
- FL14610.R10
Options
Related Products
More models in the 143 Series Vinyl.
Ready to install the EAS 143 Series Horizontal Roller Vinyl?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other horizontal roller models Armor Pro installs.
PGT Custom Windows & Doors
PGT WinGuard Aluminum Horizontal Roller HR7710A
See price & specs
ES Windows
ES Windows Prestige ES-P300 Sliding (TB Retrofit)
See price & specs
ECO Window Systems
Eco-Guard Horizontal Rolling Series 200
See price & specs
Eurocraft
Eurocraft EC-300 Horizontal Slider Window
See price & specs
Frequently Asked Questions
The 143 HR is EAS's vinyl horizontal roller window, built on the 143 Series fusion-welded frame and opening side to side. Because it slides horizontally, it suits wider openings than a single-hung allows, which makes it a good fit for rooms where you want a broad view and side-to-side ventilation. We install it on non-HVHZ Florida replacement projects.
No. The 143 HR is a non-impact window rated for non-HVHZ Florida and is not approved for the High Velocity Hurricane Zone in Miami-Dade or Broward. Within the 143 Series, only the casement and awning variants carry HVHZ certification under the Bertha Vinyl Impact branding. If you need a hurricane-rated window for your opening, we'll point you to those impact-certified options at quote.
The 143 HR is offered as a 2-lite horizontal roller in a flange configuration up to 71.5 by 59.5 inches, rated to a design pressure of +50/-50 psf. The frame itself is the 3-1/4 inch fusion-welded vinyl platform with 0.070 inch wall thickness for rigidity. We confirm the design pressure required for your specific opening before installing.
The 143 HR uses 3/4-inch insulated glass with argon and offers several Low-E packages, with U-factors from 0.30 to 0.47 and SHGC from 0.14 to 0.59. For the lowest solar heat gain, the E340 / argon / clear package hits SHGC 0.14 at U 0.31, while the E366 packages balance a U-factor of 0.30 with more visible light. Laminated glass options are also available on this non-impact unit, and we'll help you match the glass to your sun exposure and energy goals.
The 143 HR comes in White as standard, plus Desert Sand and a Bronze exterior with White interior. For grids, you can choose Grids Between Glass, Simulated Divided Light, or Colonial, Prairie, and Perimeter patterns. We'll confirm the finish and grid layout you want when we write your quote.
We don't quote a flat price because installed cost depends on the size of the opening, the glass package you choose, and the condition of the existing frame. The 143 Series is EAS's volume-tier vinyl family, so it's a cost-effective choice for non-HVHZ replacement work. Armor Pro provides a free, no-obligation estimate after measuring your opening.
The 143 Series is EAS's volume-tier vinyl window family, the everyday line for residential replacement. It is built on the same 3-1/4 inch fusion-welded frame as the flagship Bertha line, with a 0.070 inch wall that EAS markets as about 12 percent thicker than most vinyl windows. It is the broadest line in the catalog, covering six operation styles on one frame platform.
Six: single hung, double hung, horizontal roller, picture, casement, and awning. That is the widest operation coverage in the EAS vinyl catalog, which is why it is the workhorse line for a full-home replacement where you want to keep a consistent frame look across different opening types. Single hung is the volume style; the fixed picture model carries the highest design pressure in the line at 80 psf.
Eastern Architectural Systems (EAS) is a Florida manufacturer based in Fort Myers, with roots in the Eastern Metal Supply family. It builds vinyl and aluminum impact-resistant windows and doors for the Florida residential market, and is the maker of the Bertha impact line. EAS has been part of Cornerstone Building Brands since late 2023, though it still operates under its own brand. We install and service EAS products throughout South Florida.