143 Series Vinyl
Florida DBPR
Approved
Design Pressure +50/-50 psf
NFRC Certified
Made in Florida
EAS 143 Series Single Hung Vinyl
EAS's volume-tier vinyl window family with a 3-1/4 inch fusion-welded frame.
Volume-tier vinyl single-hung for non-HVHZ Florida residential replacement, on the 143 Series fusion-welded frame at 65 psf design pressure.
Florida DBPR
Approved
Design Pressure +50/-50 psf
NFRC Certified
Made in Florida
Frame finish
White
Desert Sand
Custom
Built for South Florida homes
The 143 SH is EAS's vinyl single-hung window in the 143 Series, the volume-tier residential option for non-HVHZ Florida installations. Built on the fusion-welded vinyl frame platform at 65 psf design pressure.
- Florida Building Code product-approved
- Vinyl frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Grille Patterns
Grille Styles
Grids Between Glass (GBG)Simulated Divided Light (SDL)
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Vinyl
Max Size
48 x 72 in
Design Pressure
+50/-50 psf
U-Factor
0.3–0.47
SHGC
0.14–0.6
Visible Trans.
0.15–0.64
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Single hung — Fin frame | 48 x 72 in | +50/-50 psf |
| Single hung — Flange frame | 53.125 x 72 in | +50/-50 psf |
Fin.
Flange.
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT |
|---|---|---|---|
| Clear / arg90 / clear (DS/DS) - 3/4" IG | 0.47 | 0.59 | 0.63 |
| E366 / arg90 / clear (DS/DS) - 3/4" IG | 0.31 | 0.22 | 0.5 |
| E366 / arg90 / Solargray (DS/DS) - 3/4" IG | 0.31 | 0.21 | 0.34 |
| E340 / arg90 / clear (DS/DS) - 3/4" IG | 0.3 | 0.13 | 0.3 |
| E452 / arg90 / clear (DS/DS) - 3/4" IG | 0.29 | 0.17 | 0.41 |
| Clear / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.48 | 0.56 | 0.62 |
| E366 / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.35 | 0.22 | 0.49 |
| E366 / arg90 / Solargray-lami (DS/DS|090PVB|DS) - 3/4" IG | 0.37 | 0.19 | 0.29 |
| E340 / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.34 | 0.15 | 0.3 |
| E452 / arg90 / lami (DS/DS|090PVB|DS) - 3/4" IG | 0.33 | 0.18 | 0.4 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
- FL14604.R16
Options
Related Products
More models in the 143 Series Vinyl.
Ready to install the EAS 143 Series Single Hung Vinyl?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Comparable from Other Brands
Other single hung models Armor Pro installs.
Frequently Asked Questions
The 143 SH is EAS's volume-tier vinyl single-hung window, the everyday residential option in the 143 Series for non-HVHZ Florida replacement work. It's built on the 3-1/4 inch fusion-welded vinyl frame, with the bottom sash sliding up to open. We install it as a cost-effective, low-maintenance choice for inland and non-coastal home replacement projects.
No. The 143 SH is a non-impact window rated for non-HVHZ Florida and is not approved for the High Velocity Hurricane Zone in Miami-Dade or Broward. In the 143 Series, only the casement and awning models carry HVHZ certification under the Bertha Vinyl Impact branding. If your opening needs a hurricane-rated window, we'll point you to those impact-certified options at quote.
The 143 SH comes in a fin-frame configuration up to 48 by 72 inches and a flange-frame configuration up to 53.125 by 72 inches, with the listed configurations rated to +50/-50 psf. The 143 Series single-hung platform is published at up to 65 psf design pressure overall. We confirm the exact size and design pressure your specific opening requires before installing.
The 143 SH uses 3/4-inch insulated glass with argon and a range of Low-E options, with U-factors from 0.29 to 0.48 and SHGC from 0.13 to 0.59. The E340 package reaches SHGC 0.13 at U 0.30 for strong solar control, while the E452 package balances U 0.29 with more visible light, and laminated glass is also available. We'll help you match the glass to your home's sun exposure and energy goals.
Yes. The 143 SH comes standard with a tilt sash, coil-pack balancers, and an integral lift rail, so the operating sash tilts in for easy cleaning from inside. For finishes it's offered in White as standard, plus Desert Sand and a Bronze exterior with White interior, with grid options including Grids Between Glass, Simulated Divided Light, Colonial, Prairie, and Perimeter. We'll confirm your finish and grid choices when we quote.
We don't quote a flat price because installed cost depends on the size of the opening, the glass package you choose, and the condition of the existing frame. As EAS's volume-tier vinyl single-hung, the 143 SH is a budget-friendly choice for non-HVHZ replacement projects. Armor Pro provides a free, no-obligation estimate after measuring your opening.
The 143 Series is EAS's volume-tier vinyl window family, the everyday line for residential replacement. It is built on the same 3-1/4 inch fusion-welded frame as the flagship Bertha line, with a 0.070 inch wall that EAS markets as about 12 percent thicker than most vinyl windows. It is the broadest line in the catalog, covering six operation styles on one frame platform.
Six: single hung, double hung, horizontal roller, picture, casement, and awning. That is the widest operation coverage in the EAS vinyl catalog, which is why it is the workhorse line for a full-home replacement where you want to keep a consistent frame look across different opening types. Single hung is the volume style; the fixed picture model carries the highest design pressure in the line at 80 psf.
Eastern Architectural Systems (EAS) is a Florida manufacturer based in Fort Myers, with roots in the Eastern Metal Supply family. It builds vinyl and aluminum impact-resistant windows and doors for the Florida residential market, and is the maker of the Bertha impact line. EAS has been part of Cornerstone Building Brands since late 2023, though it still operates under its own brand. We install and service EAS products throughout South Florida.