Pella Vista Aluminum Pass-Through

The Vista Pass-Through is built from a minimum of about 54.2 inches wide by 24 inches tall up to a maximum of roughly 150.2 inches wide by 72 inches tall, so it can span a generous serving counter. Within that range it's made to your exact opening, which is part of what makes it a premium architect-channel product. We'll measure your opening and confirm the size that fits your wall when we quote.

No. Vista is Pella's non-impact premium aluminum line, and the Vista Pass-Through carries a design pressure of +35/-35 psf, which is not an HVHZ rating for Miami-Dade or Broward. If you want a hurricane-rated indoor-outdoor opening, we can steer you to a Pella impact configuration instead and confirm the approval that applies at quote. We'll be straight with you about what each option is rated for.

Depending on the glass package you choose, the Vista Pass-Through carries a U-factor in the range of 0.23 to 0.37 and a solar heat gain coefficient (SHGC) from 0.13 to 0.49, with visible transmittance from 0.25 to 0.58. For South Florida, a low-SHGC, low-U glass package helps keep heat out while keeping the opening bright. We'll walk you through the glass options and recommend the package that fits your exposure and budget.

The Vista Pass-Through uses an aluminum frame, which is what gives the Vista Series its signature ultra-thin sightlines and lets the unit carry expansive glass over a wide serving opening. Aluminum's strength is what allows the thin profiles on a counter-width pass-through. We set and seal the frame so the opening stays weathertight after install.

There's no flat price because the installed cost depends on the size of the opening, the glass package you select, and the condition of the existing wall. Because the Vista Pass-Through is a premium aluminum unit made to your exact opening, sizing it correctly matters to the quote. Armor Pro gives a free, no-obligation estimate, and we'll measure your serving opening and price the Vista Pass-Through for your project.

No. Vista is Pella's premium aluminum line built for ultra-thin sightlines and walls of glass, but it is a non-impact, non-HVHZ product. The multi-slide door carries a Florida state-level approval, not a Miami-Dade NOA, and the line does not claim large-missile impact. For an HVHZ address that needs impact glazing, Vista on its own won't pass; the Pella impact answer is HurricaneShield or Reserve Impact. We confirm impact and design-pressure requirements per opening and jurisdiction before specifying it.

Vista is thermally-broken aluminum aimed at high-design projects, the line a designer reaches for when the elevation is mostly glass and the frame is supposed to disappear. The catalog runs nine configurations, including a pivot door, a multi-slide reaching up to ten panels, and casements up to ten feet tall for floor-to-ceiling openings. The thin profiles are possible precisely because it isn't carrying impact glass, which needs more frame mass to hold large-missile load.

Pella Corporation is a family-owned national manufacturer headquartered in Pella, Iowa, founded in 1925 and now spanning more than 20 plants across the country. For the Florida hurricane market the important detail is that Pella's impact lines, HurricaneShield and Defender, are built in Ocala, Florida by Pella's CWS subsidiary, so the storm products are made in-state rather than shipped in. We install and service Pella across South Florida and handle the order, permit, and installation regardless of which plant a given product comes from.