Mr Glass

MG-500 Impact Resistant Commercial Door

Flagship aluminum impact commercial door, the only commercial Mr Glass product carrying both Florida Product Approval and a Miami-Dade NOA. Single and double leaf.

HVHZ Approved Impact Rating LMI Design Pressure +120/-120 psf Energy Florida Made in Florida

Impact protection, built for South Florida

The MG-500 is Mr Glass's flagship impact-resistant aluminum commercial door, the only commercial-line product carrying both Florida Product Approval (FL #27001) and a Miami-Dade Notice of Acceptance (NOA #18-0314.07) for HVHZ installations. Single-leaf and double-leaf configurations cover residential, commercial, and institutional entrance applications. Sizes up to 87.5 by 144 inches (double leaf), rated to 120 psf positive and 130 psf negative design pressure.

  • Tested & certified to Miami-Dade HVHZ hurricane standards
  • Large-missile impact-rated laminated glass
  • Energy-efficient Low-E insulated glass options to control heat gain
  • Professionally installed across South Florida by Armor Pro
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship

At a Glance

Max Size 51.5 x 144 in
Design Pressure +120/-120 psf
Impact Rating LMI

Sizes & Pressures

Configuration Max size Design pressure
Impact Resistant Outswing Commercial Door (single, with transom) 51.5 x 144 in +120/-120 psf
Impact Resistant Outswing Commercial Door (double, with transom) 99.5 x 144 in +90/-90 psf

Glass & Energy Performance

Glass packageU-FactorSHGC VT
9/16" Laminated Clear: 1/4" Clear HS + 0.09 PVB + 1/4" Clear HS1.060.4 0.43
9/16" Laminated Clear w/ SB70: 1/4" Clear (SB70 surf#2) HS + 0.09 SGP + 1/4" Clear HS1.060.2 0.3
9/16" Laminated Gray: 1/4" Gray HS + 0.09 SGP + 1/4" Clear HS1.060.31 0.21
9/16" Laminated Gray w/ SB70: 1/4" Gray (SB70 surf#2) HS + 0.09 SGP + 1/4" Clear HS1.060.23 0.15
9/16" Laminated Bronze: 1/4" Bronze HS + 0.09 PVB + 1/4" Clear HS1.060.33 0.26
9/16" Laminated Bronze w/ SB70XL #3: 1/4" Bronze HS + 0.09 SGP + 1/4" Clear HS (SB70 surf#3)1.060.23 0.18
9/16" Laminated Solex Green: 1/4" Solexia HS + 0.09 PVB + 1/4" Clear HS1.050.33 0.38
9/16" Laminated Solex w/ SB70XL #3: 1/4" Solexia HS + 0.09 SGP + 1/4" Clear HS (SB70 surf#3, flipped)1.050.19 0.26
1-1/16" Insul Laminated Clear: 1/4" Clear + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.830.38 0.39
1-1/16" Insul Laminated w/ SB70: 1/4" Clear (SB70 #2) + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.740.18 0.31
1-1/16" Insul-Laminated Gray: 1/4" Gray + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.830.26 0.19
1-1/16" Insul-Laminated Gray w/ SB70: 1/4" Gray (SB70 #2) + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.740.14 0.16
1-1/16" Insul-Laminated Bronze: 1/4" Bronze + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.830.29 0.23
1-1/16" Insul-Laminated Bronze w/ SB70: 1/4" Bronze + 3/8" Arg + 3/16" Clear (SB70 #4) HS + 0.09 PVB + 3/16" Clear HS0.830.21 0.16
1-1/16" Insul-Laminated Solex Green: 1/4" Solexia + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.830.28 0.34
1-1/16" Insul-Laminated Solex Green w/ SB70: 1/4" Solexia (SB70 #2) + 3/8" Arg + 3/16" Clear HS + 0.09 PVB + 3/16" Clear HS0.740.18 0.29

Performance Certifications

Miami-Dade County Product Control Approved Florida Building Code Product Approval

Energy-performance data on file (manufacturer-published; not third-party certified).

  • Miami-Dade NOA 18-0314.07
  • FL DBPR FL27001.R3

Options

Glass tint
Clear (standard)GrayBronzeSolex GreenSolargrayLow-E (Solarban SB70 / SB70XL / SB60)Privacy (white / translucent interlayer)
Hardware
Push and Pull Handles (standard)Concealed 3-point locksPanic devicesStainless steel ball bearing hinges and offset pivots (standard)

Ready to install the MG-500 Impact Resistant Commercial Door?

Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.

Frequently Asked Questions

The MG-500 is Mr Glass's flagship impact-resistant aluminum commercial door, available in single-leaf and double-leaf configurations. We install it on residential, commercial, and institutional entrances where a strong, code-approved impact door is needed. It is Mr Glass's only commercial-line product carrying both a Florida Product Approval and a Miami-Dade NOA, making it a versatile choice for South Florida entrance openings.

Yes. The MG-500 is a large-missile impact (LMI) door approved for the High-Velocity Hurricane Zone, carrying Miami-Dade NOA 18-0314.07 and Florida Product Approval FL27001.R3. That dual approval means we can install it in Miami-Dade and Broward as well as the rest of Florida. We'll confirm the exact approval and rating for your specific opening at the time of quote.

The MG-500 reaches up to 87.5 by 144 inches overall and is rated to 120 psf positive and 130 psf negative design pressure. In practice, the single-leaf outswing configuration with transom runs up to 51.5 by 144 inches at +120/-120 psf, while the double-leaf with transom goes up to 99.5 by 144 inches at +90/-90 psf. We'll verify which configuration and rating fit your opening before installation.

The MG-500 offers a wide range of laminated and insulated-laminated glass packages. The 9/16-inch laminated options run around a U-factor of 1.05 to 1.06, while the 1-1/16-inch insulated-laminated packages improve to roughly U 0.74 to 0.83. SHGC can be tuned from about 0.40 down to 0.14 with Low-E coatings like Solarban SB70, so we'll help you balance solar heat gain, visible light, and efficiency for your project.

The MG-500 comes standard with push-and-pull handles and stainless steel ball-bearing hinges and offset pivots, with concealed 3-point locks and panic devices available as upgrades. The aluminum frame is finished with AAMA 2604 powder coat as standard (5-year warranty), or an upgraded AAMA 2605 finish (10-year warranty). We'll review hardware and finish choices with you so the door suits how the entrance is used.

Installed pricing for the MG-500 depends on whether you choose a single- or double-leaf configuration, the size of the opening, the glass package and tint, the hardware, and the frame finish. Because this is an HVHZ-rated commercial door that can run up to 87.5 by 144 inches, every project is priced individually. Armor Pro provides a free, no-obligation estimate once we measure your opening.

Mr Glass runs a deep catalog, and we install across most of it. On the residential side that means impact windows in single-hung, horizontal-roller (sliding), fixed picture, and casement and awning styles, plus a full range of doors: entry and outswing doors, architectural pivot doors, and sliding glass doors including the multitrack pocket slider. They also build a commercial line of impact and non-impact storefronts, window walls, curtain walls, glass railings, and aluminum louvers that we handle on light-commercial projects. We help you match the right Mr Glass product to each opening and pull the matching approval for your county.

Most of the line is, but it depends on the specific product. Mr Glass's premium residential windows are dual-certified to both Large Missile Impact (LMI) and Small Missile Impact (SMI), which covers them for high-rise and coastal work anywhere in the High-Velocity Hurricane Zone of Miami-Dade and Broward. Their value-tier windows and all of their doors carry the impact certification needed for the HVHZ as well, and a couple of commercial products (the MG-275 door and MG-4500 storefront) are non-impact and are not used in the wind-borne-debris zone. We confirm the exact product, rating, and approval for your address before we quote and permit.

A swing door is hinged and opens in or out — a French door is a glazed door (often in pairs), while an entry door is the main door to the home. The impact versions use laminated glass and reinforced frames and hardware tested to the HVHZ standard, protecting the opening against debris and forced entry.

Protect your home with Armor Pro Windows & Doors!

Call (954) 231-7164 or Get Started Online with a Free Estimate!