Specialty & Interior Systems
Design Pressure +130 psf
ES Windows 050M Railing
ES Windows's interior systems — folding and sliding closet doors and glass partition walls.
Design Pressure +130 psf
ES Windows
Product photography coming soon
Built for South Florida homes
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Outside Glazed SSG Vertical | 54 x 44 in | +130 psf |
| Inside Glazed Vertical Captured | 54 x 44 in | +130 psf |
| Corner (Inside Corner 90 deg) | 54 x 44 in | +130 psf |
Options
Related Products
More models in the Specialty & Interior Systems.
Frequently Asked Questions
The 050M is an interior glass partition system in ES Windows's Specialty & Interior Systems line, built on an aluminum frame with fixed 3/8-inch clear tempered monolithic glass panels. It is used to divide rooms and create glass walls indoors, with outside-glazed, inside-glazed captured, and 90-degree inside-corner configurations available. We install the 050M on South Florida projects that want a clean glass partition rather than a structural exterior wall.
No. The 050M is part of ES Windows's interior, non-storm Specialty & Interior Systems line and carries no exterior, structural, or hurricane-impact rating, so it should not be used as a storm barrier. If you need impact protection for an exterior opening, we will instead spec one of the impact-rated and HVHZ-approved ES Windows window or door lines. As your installer, we make sure interior partitions and storm-rated products are used in the right places.
Each 050M panel runs up to a maximum of 54 by 44 inches across all three layouts: outside-glazed SSG vertical, inside-glazed vertical captured, and the 90-degree inside corner. Larger partition walls are built by ganging panels together within these limits. We confirm the panel layout and module sizing for your space at quote.
The 050M uses 3/8-inch clear tempered monolithic glass as standard, glazed either outside-reglaze or inside-reglaze, with optional reinforcement. The glass can be finished painted, with serigraphy (silkscreen), or digitally printed for branding or decorative patterns. We will help you choose a glazing method and glass finish that fits the look you want for the partition.
The 050M's configurations show a +130/None psf rating, which reflects the panel's structural capacity in testing, but it is still classified as an interior, non-storm product with no exterior or impact rating. That number does not make it suitable as a hurricane barrier on an exterior opening. We treat the 050M strictly as an interior partition and spec impact-rated products for any storm-protection needs.
Installed pricing for the 050M depends on the number of panels, the layout (including any inside corners), the glass finish you choose, and the site conditions, so there is no single price. Armor Pro handles measurement and installation of the interior partition system as your installer. Contact us for a free, no-obligation estimate and we will measure your space and quote the 050M.
This line collects ES Windows's interior, non-storm products: the ES-BF155 folding/bifold closet door, the ES-CD332 top-hung sliding closet-and-partition door (which needs no floor track), and the ES-PW2030 and ES-PW3025 interior glass partition walls. They are lightweight architectural systems for closets and room division.
No. These are interior closet and partition systems with no exterior, structural, or impact role, so they are not hurricane products and would not appear on an impact-window or door quote. We catalog them only for completeness; for storm protection we spec the aluminum impact lines.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.