Specialty & Interior Systems
ES Windows ES-CD332 Sliding Closet Door
ES Windows's interior systems — folding and sliding closet doors and glass partition walls.
Interior aluminum top-rail hanging/sliding closet-and-partition door requiring no floor track or floor roller.
Built for South Florida homes
The ES-CD332 is an interior, non-impact aluminum top-rail hanging/sliding closet-and-partition system that is versatile and meets demanding building codes and architectural safety and durability standards. It requires no floor track or floor roller, and its vertical profiles allow installation of a security mechanism. It supports a maximum height of 3 m, a maximum width of 4 m, and a maximum panel weight of 65 kg, accepting 4 mm/5 mm monolithic glass and 3 mm+3 mm laminated glass, with frame depths of 36 mm, 71 mm, and 106 mm. Available in up to four-panel configurations with a wide range of aluminum frames and silkscreen color, texture, and glass-print options.
- Aluminum frame engineered for strength and durability
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Engineered Strength
Built and tested to Florida product-approval standards
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
Related Products
More models in the Specialty & Interior Systems.
Frequently Asked Questions
The ES-CD332 is an interior aluminum top-rail hanging and sliding system for closets and room partitions. Because it hangs from a top rail and needs no floor track or floor roller, it's a clean way to enclose a closet or divide a space without a threshold on the floor. We install it indoors where homeowners want a sliding closet or partition door that meets architectural safety and durability standards.
No. The ES-CD332 is an interior, non-impact (NI) aluminum system and carries no exterior, structural, or impact rating, so it is not for hurricane protection or the High Velocity Hurricane Zone covering Miami-Dade and Broward. It's meant strictly for indoor closet and partition use. If you need impact-rated, HVHZ-approved openings, we'll point you to ES Windows's exterior impact lines instead.
The ES-CD332 supports a maximum height of 3 meters (about 9 feet 10 inches) and a maximum width of 4 meters (about 13 feet 1 inch), with a maximum panel weight of 65 kg (roughly 143 lb). It can be built in configurations up to four panels. We'll confirm the exact panel layout and dimensions that fit your opening when we measure and quote.
The ES-CD332 accepts 4 mm or 5 mm monolithic glass as well as 3 mm + 3 mm laminated glass, and it comes in three frame depths: 36 mm, 71 mm, and 106 mm. It also offers a wide range of aluminum frames plus silkscreen color, texture, and glass-print options for the look you want. We'll help you choose the glass and frame depth that suit the room during your consultation.
Yes. The ES-CD332's vertical profiles are designed to allow installation of a security mechanism, so the door can be fitted with a lock. Because it's a top-hung sliding system with no floor track, the locking hardware ties into the vertical profile rather than the floor. We'll review the security and hardware options with you when we plan the installation.
We don't quote a flat price because the installed cost of an ES-CD332 depends on the opening size, the number of panels, the glass and frame depth you choose, and any finish or print options. Since this is an interior, non-impact system, the room and wall conditions also factor in. Armor Pro provides a free, in-person estimate so you get an accurate number for your project.
This line collects ES Windows's interior, non-storm products: the ES-BF155 folding/bifold closet door, the ES-CD332 top-hung sliding closet-and-partition door (which needs no floor track), and the ES-PW2030 and ES-PW3025 interior glass partition walls. They are lightweight architectural systems for closets and room division.
No. These are interior closet and partition systems with no exterior, structural, or impact role, so they are not hurricane products and would not appear on an impact-window or door quote. We catalog them only for completeness; for storm protection we spec the aluminum impact lines.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.