Specialty & Interior Systems
ES Windows ES-PW2030 Interior Partition Wall
ES Windows's interior systems — folding and sliding closet doors and glass partition walls.
Lightweight, elegant interior aluminum partition wall with single clear glass and reduced frame dimensions for a very light aesthetic.
Built for South Florida homes
The ES-PW2030 is a lightweight, elegant interior aluminum partition wall glazed with single clear glass. Its reduced aluminum-frame dimensions create an extremely light aesthetic solution. Frame depth and sight line are both 1-3/8", with a profile height of 2-1/2" and width of 3-1/2"; a typical module (L=3' x H=8') weighs 132.3 lb (60 kg) with a ±3/16" tolerance. The glass is set with shims of varying thickness and features polished edges plus optional notches and perforations.
- Aluminum frame engineered for strength and durability
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Engineered Strength
Built and tested to Florida product-approval standards
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
Options
Related Products
More models in the Specialty & Interior Systems.
Frequently Asked Questions
The ES-PW2030 is a lightweight, elegant interior aluminum partition wall glazed with single clear glass. Its reduced aluminum-frame dimensions create an extremely light, minimal look, which makes it a good fit for dividing offices, rooms, or open living areas where you want to keep sight lines open. We install it indoors as a glass room divider, not as an exterior or storm product.
No. The ES-PW2030 is an interior, non-impact (NI) partition and carries no exterior, structural, or impact rating, so it is not for hurricane protection or the High Velocity Hurricane Zone in Miami-Dade and Broward. It's strictly an indoor room-division system. If you need impact-rated, HVHZ-approved openings, we'll direct you to ES Windows's exterior impact lines.
The ES-PW2030 has a frame depth and sight line of just 1-3/8 inches, with a profile 2-1/2 inches high and 3-1/2 inches wide, which gives it a very light aesthetic. A typical module measuring 3 feet wide by 8 feet tall weighs about 132.3 lb (60 kg) with a tolerance of plus or minus 3/16 inch. We'll confirm the module sizing for your space when we measure and quote.
The ES-PW2030 can be glazed with laminated glass in 1/4" + 0.03 + 1/4" or 3/16" + 0.03 + 3/16" makeups, or with monolithic glass in 1/2" or 3/8". The glass is set with shims of varying thickness and comes with polished edges plus optional notches and perforations. For appearance, the glass can also be painted, serigraphed, or digitally printed, and we'll help you pick the right build during your consultation.
The ES-PW2030 is available as a single sliding door, a double sliding door, or a pivot configuration, so we can match it to how you want the partition to open. For the frame, both painted and anodized finishes are offered as standard. We'll recommend the configuration and finish that work best for your room when we put together your estimate.
We don't quote a flat price because the installed cost of an ES-PW2030 depends on the wall size and number of modules, the glass makeup and any glass-print options, the configuration you choose, and the frame finish. Since this is an interior, non-impact system, the room and floor conditions also factor in. Armor Pro provides a free, in-person estimate so you get an accurate number for your project.
This line collects ES Windows's interior, non-storm products: the ES-BF155 folding/bifold closet door, the ES-CD332 top-hung sliding closet-and-partition door (which needs no floor track), and the ES-PW2030 and ES-PW3025 interior glass partition walls. They are lightweight architectural systems for closets and room division.
No. These are interior closet and partition systems with no exterior, structural, or impact role, so they are not hurricane products and would not appear on an impact-window or door quote. We catalog them only for completeness; for storm protection we spec the aluminum impact lines.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.