ES Windows PH-3200 Sliding Glass Door

Each panel of the PH-3200 reaches a maximum of 119.5 by 49.5 inches, up to about 41 square feet per panel, across the 2-, 3-, and 4-panel layouts. All configurations are rated to a design pressure of +120/-120 psf, which is a strong rating for resisting hurricane wind loads. Because the design pressure your opening must meet depends on its size and wind exposure, we confirm the required rating at quote.

Yes. The PH-3200 is built with laminated impact glass. The standard G1 package is a 1/4-inch tempered + 1/2-inch air spacer + 1/4-inch heat-strengthened + 0.090 SentryGlas + 1/4-inch heat-strengthened make-up rated for large-missile impact, while the G2 (0.060 PVB) and G3 (0.035 PVB) packages are rated for small-missile impact. We help you choose the right glass package for your opening and its protection requirements at quote.

Across its glass packages the PH-3200 carries a U-factor of 0.67, with solar heat gain coefficient (SHGC) varying by tint and coating, for example about 0.56 with clear glass, 0.37 with gray, and as low as 0.26 to 0.27 with an SB70 low-E coating. Visible transmittance ranges from roughly 0.16 to 0.63 depending on the package. We will recommend the glass tint and coating that best balance daylight and heat control for your project.

The PH-3200's glass can be ordered with painted, serigraphy, or digitally printed finishes, which is useful for spandrel areas or decorative commercial glazing. An optional screen is available for the two-track frame configuration. We will go over the finish and screen options that fit your design when we scope the door.

Installed pricing for the PH-3200 depends on the panel configuration (2-, 3-, or 4-panel), the overall size, the glass package and tint, any glass finish or screen options, and the condition of the existing opening. As your installer, Armor Pro handles measurement, permitting, and code-compliant installation. Contact us for a free, no-obligation estimate and we will measure your opening and quote the PH-3200.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.