Commercial & Architectural Series
ES Windows NS-25PV Curtain Wall
ES Windows's commercial and architectural glazing — storefront, curtain wall, window wall, and high-pressure impact commercial systems.
Pressure-plate/structurally-glazed variant of the NS-25 stick-built curtain wall, sharing its 63–254 mm depth range and glass spec.
Built for South Florida homes
The NS-25PV is a variant of the NS-25 stick-built aluminum curtain wall, sharing the same 63–254 mm frame depth range and 6–28 mm glass specification; the "PV" designation indicates a pressure-plate or structurally-glazed face option. It is factory-fabricated and site-assembled, installed from the exterior with a 90° corner option, and is compatible with the NP-25 projected window and ES-21/ES-35 doors. No design pressure, impact rating, or Florida approval is stated for this LATAM architectural system.
- Aluminum frame engineered for strength and durability
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Engineered Strength
Built and tested to Florida product-approval standards
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
Related Products
More models in the Commercial & Architectural Series.
Frequently Asked Questions
The NS-25PV is a variant of ES Windows's NS-25 stick-built aluminum curtain wall, sharing the same frame depths and glass range. The "PV" designation indicates a pressure-plate or structurally-glazed face option, which changes how the glass is captured on the exterior compared with the base NS-25. We install it where the design calls for that pressure-plate or structural-glazing facade look on a commercial building.
The NS-25PV shares the NS-25's frame depth range of 63 mm, 102 mm, 152 mm, 203 mm, and 254 mm, sized to suit different facade spans and loads. It accepts glass from 6 mm to 28 mm, covering monolithic, laminated, and insulated-laminated make-ups. A 90-degree corner option is available for continuous glazing around building corners.
No. Like the base NS-25, the NS-25PV is a Latin-American architectural framing system with no design pressure, impact rating, or Florida approval stated, so it is not HVHZ-approved for the Miami-Dade and Broward High-Velocity Hurricane Zone. For a permitted South Florida high-rise facade, we would specify one of ES Windows's U.S.-market HVHZ-rated systems instead. We always confirm what your jurisdiction requires before specifying a facade.
The NS-25PV is factory-fabricated and then site-assembled as a stick-built system, and it is installed from the exterior of the building. The pressure-plate or structurally-glazed face is set as the glass is installed into the assembled framing. As your installer, Armor Pro coordinates the fabrication and the exterior installation sequence for the facade.
Yes. The NS-25PV is compatible with the NP-25 projected window and with ES-21 and ES-35 doors, so vents and entrances can be built into the glazed wall. This lets a designer mix fixed structural-glazed areas with operable awning windows and swing doors in one continuous facade. We coordinate those integrated openings as part of the project scope.
There is no single price for the NS-25PV because it is a project-built facade; installed cost depends on the total glazed area, the frame depth chosen, the glass make-up, the pressure-plate or structural-glazing detail, corner conditions, and the building's height and access. Engineering and permitting for a commercial facade also factor in. Contact Armor Pro for a free estimate and we will scope and quote your facade.
This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.
The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.