Commercial & Architectural Series
Florida DBPR
Approved
NFRC Certified
ES Windows ISF-200 Storefront
ES Windows's commercial and architectural glazing — storefront, curtain wall, window wall, and high-pressure impact commercial systems.
Fixed storefront window on a 51 mm aluminum frame for tempered monolithic glass, with concealed installation screws for a clean modern finish.
Florida DBPR
Approved
NFRC Certified
Built for South Florida homes
The ISF-200 is a fixed storefront window built on a 51 mm aluminum frame for tempered monolithic glass. It ships pre-assembled with concealed installation screws for a clean, modern appearance and is fully compatible with the ISC-200 and ISC-250 sliding storefront systems. No design pressure, impact rating, or Florida approval is stated for this LATAM architectural system.
- Florida Building Code product-approved
- Aluminum frame engineered for strength and durability
- Energy-efficient Low-E insulated glass options to control heat gain
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
U-Factor
0.57–1.09
SHGC
0.17–0.6
Visible Trans.
0–0.66
Frame Depth
2.01 in
Glass & Energy Performance
| Glass package | U-Factor | SHGC | VT | CR |
|---|---|---|---|---|
| Bronze | 0.923 | 0.473 | 0.447 | 14 |
| Clear | 0.918 | 0.518 | 0.625 | 14 |
| Green | 0.923 | 0.47 | 0.59 | 14 |
| Gray | 0.911 | 0.407 | 0.33 | 14 |
| Clear, Air | 0.63 | 0.23 | 0.49 | 15 |
| Bronze, Low-E, Air | 0.63 | 0.18 | 0.227 | 15 |
| Clear, Low-E, Air | 0.618 | 0.244 | 0.478 | 15 |
| Green, Low-E, Air | 0.63 | 0.24 | — | 15 |
| Gray, Low-E, Air | 0.63 | 0.197 | 0.28 | 15 |
U-Factor / SHGC shown without grids; add-grid values vary slightly. Confirm exact ratings for your opening at quote.
Performance Certifications
- FL28670.R2
Related Products
More models in the Commercial & Architectural Series.
Frequently Asked Questions
The ISF-200 is a fixed (non-operable) storefront window built on a 51 mm aluminum frame for tempered monolithic glass. Because it doesn't open, it's used for the picture-glass sections of a storefront wall, pairing with sliding or operable units alongside it. We install the ISF-200 where a project needs clean fixed glass in a storefront, and we'll lay out the wall at quote.
The ISF-200 ships pre-assembled with concealed installation screws, which hides the fasteners for a clean, modern appearance once it's set in the opening. Arriving pre-assembled also speeds up the field install since the unit goes in as one piece. We'll confirm how it sets into your specific opening when we measure.
No. The ISF-200 is a Latin-American architectural storefront system, and no design pressure, impact rating, or Florida approval is stated for it, so we won't represent it as HVHZ-rated. For a hurricane-rated fixed commercial lite, the ES Windows Commercial & Architectural Series includes U.S.-market HVHZ impact systems such as the ES-7500/7600 window wall and the ES-8860 at +150/-150 psf. We'll confirm what your permit requires and steer you to an approved system if impact rating is needed.
Yes. The ISF-200 fixed storefront is fully compatible with the ES Windows ISC-200 and ISC-250 sliding storefront systems, so you can run fixed picture sections next to operable sliding sections in one coordinated wall. That lets you put ventilation where you need it and fixed glass everywhere else. We'll plan that layout for your opening when we measure.
As part of the ES Windows IS-series storefront family, the ISF-200 is offered in painted, anodized, and wood-grain finishes, with painted allowing a custom color match. The 51 mm aluminum frame keeps the sightlines slim and consistent with the ISC-200 and ISC-250 it pairs with. We'll review the finish choices so the whole storefront matches.
Installed pricing on the ISF-200 depends on the size of the lite, the glass, the finish, and the condition of the existing opening, so there is no flat price. As the installer, Armor Pro handles measurement and code-compliant installation. Contact us for a free estimate, and we'll also confirm whether your project needs a hurricane-rated system instead.
This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.
The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.