ES Windows HR-2600 Sliding Window

The HR-2600 is offered in three layouts: two-panel (one operable, one fixed), three-panel, and four-panel with a center operable pair. All three layouts span up to 156 by 80.75 inches, so you can run a very wide window opening with this system. We'll lay out the panel configuration that fits your opening and how you want it to operate before ordering.

Yes, the HR-2600 is a high-pressure impact sliding window rated to +120/-120 psf across all of its panel layouts. That pressure capacity is what allows it to serve commercial and mid-rise hurricane-zone work in South Florida. We verify the exact design pressure your specific opening must meet for your address and wind exposure before we order.

The HR-2600 is glazed with laminated impact glass using DuPont SentryGlas interlayers: the standard buildups are 1/4" clear heat-strengthened + 0.090" SentryGlas + 1/4" heat-strengthened, or the same with a 0.060" interlayer. SentryGlas is a stiffer, stronger interlayer than standard PVB, which suits the unit's high pressure rating. We'll confirm the glass buildup for your project at quote.

Yes, the HR-2600 can be fitted with an aluminum-frame screen with fiberglass mesh, and it uses an aluminum finger lock as standard hardware. The frame is available anodized, painted, or in a wood-grain finish, with painted allowing custom color matching to the facade. We'll go over the screen, hardware, and finish options with you so the HR-2600 matches the building.

Installed pricing on the HR-2600 depends on the panel layout you choose, the overall size, the SentryGlas glass package, the finish, and the condition of the existing opening, so there is no flat price. As the installer, Armor Pro handles measurement, permitting, and code-compliant installation of this high-pressure commercial slider. Contact us for a free estimate and we'll measure your openings and quote the HR-2600.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.