ES Windows ES-WW1032 Curtain Wall

The ES-WW1032 captured curtain wall is rated to a design pressure of +138/-138 psf, a high capacity suited to demanding commercial wind loads, and framing units can run up to 60 by 192 inches. Because the pressure your building must meet depends on its height, exposure, and zone, we verify the rating each opening has to reach during engineering and permitting. We'll confirm the ES-WW1032 meets your project's wind load before ordering.

The ES-WW1032 offers a laminated G1 build of 1/4-inch heat-strengthened glass with a 0.090-inch SGP interlayer and 1/4-inch heat-strengthened glass, plus an insulated-laminated G2 build that adds a 1/4-inch tempered lite and a 1/2-inch spacer in front of that laminated makeup for better thermal performance. The SGP (SentryGlas) interlayer is a stiff structural interlayer used in high-performance laminated glazing. We'll review which glass package best suits your building's energy and structural needs at quote.

Yes, beyond the standard glass the ES-WW1032 supports painted, serigraphy (silk-screen ceramic frit), and digitally printed glass finishes, which let the facade carry patterns, spandrel coloring, or custom graphics. These finishes are common on commercial curtain wall where the design calls for branded or decorative glazing. We'll help you coordinate the glass finish with your architect during the quote.

The ES-WW1032 comes in anodized as the standard frame finish, with painted and wood-grain finishes also offered. That lets the aluminum be matched to a clean architectural anodized look, a specific paint color, or a warmer wood-grain appearance. We'll go over the finish options so the curtain wall matches your building's design.

Installed pricing for the ES-WW1032 depends on the total facade square footage, the glass build (laminated G1 versus insulated-laminated G2), any printed or colored glass finish, and the access and condition of the opening, so there is no single price. As your installer, Armor Pro handles measurement, engineering coordination, permitting, and code-compliant installation. Contact us for a free, no-obligation estimate and we'll quote the ES-WW1032 for your project.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.