ES Windows ES-WW1025T Curtain Wall

The ES-WW1025T is rated for individual framing units up to 60 by 192 inches, with a design pressure of +75/-50 psf in its standard configuration. Because the design pressure your building must meet depends on its height, exposure, and zone, we verify the rating each opening has to reach during the permitting and engineering stage. We'll confirm the ES-WW1025T meets your project's wind load before we order.

The ES-WW1025T's glass package is a structural-silicone-glazed insulated unit of 1/4-inch clear glass, a 1/2-inch air space, and 1/4-inch clear glass, with a U-factor of 0.35 for solid thermal performance on a commercial facade. The thermally broken aluminum frame works with that insulated glass to reduce heat transfer through the wall. We'll review the glass build that best balances daylight and energy use for your building at quote.

The ES-WW1025T is offered in both structural silicone glazed (SSG) and captured glazing methods as standard. SSG bonds the glass to the frame with high-strength silicone for a smooth, flush exterior with minimal visible metal, while captured glazing holds the glass with an outer pressure plate and cap for a more traditional gridded look. We'll help you choose the glazing method that matches your building's design intent.

The ES-WW1025T comes standard in anodized, painted, and wood-grain frame finishes, so the aluminum can be matched to a clean architectural anodized look, a specific paint color, or a warmer wood-grain appearance. The system also accepts internal frame reinforcement where added structural capacity is needed. We'll go over the finish options and reinforcement so the curtain wall fits your facade design.

Installed pricing for the ES-WW1025T depends on the total square footage of the facade, the glass package and glazing method, the finish, and the condition and access of the opening, so there is no single price. As your installer, Armor Pro handles measurement, engineering coordination, permitting, and code-compliant installation of the curtain wall. Contact us for a free, no-obligation estimate and we'll measure your project and quote the ES-WW1025T.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.