ES Windows ES-W625 Unitized Window Wall

The ES-W625 unitized window wall is rated for openings up to 60 by 120 inches at a design pressure of +65/-65 psf. The pressure your specific elevations must meet depends on building height and wind exposure, so we confirm the rating each opening needs against your project engineering at quote and verify the ES-W625 fits before ordering.

Yes. The ES-W625's G1 package is a 1 1/4-inch insulated laminated unit built from a 1/4-inch clear tempered lite, a 1/2-inch air space, and two 3/16-inch heat-strengthened lites bonded with a 0.06-inch SGP interlayer, which is a laminated make-up. A simpler G2 1-inch insulated unit (1/4-inch clear, 1/2-inch air, 1/4-inch clear) is also offered. As your installer, we confirm the exact rating and the specific product approval that applies to your building and glass package before permitting.

The ES-W625 reaches a U-factor of about 0.35 with its insulated glass package, supported by the thermal break in the aluminum framing. The exact energy numbers depend on which glass make-up you choose, the laminated G1 unit or the standard G2 insulated unit. We'll confirm the glass package and resulting ratings for your building at quote.

The ES-W625 frame is available in anodized, painted, and wood-grain finishes, and the glass can be customized with painted, serigraphy, or digital-printed finishes for branded or architectural facades. Mullions are offered in captured or structural-silicone-glazed (SSG) styles, with inside or outside reglazing. We'll review these options with your design team so the window wall matches the building's design intent.

There is no single price for the ES-W625 because installed cost depends on the glazed area, whether you choose the laminated G1 or standard G2 glass, the finish, the mullion style, and the opening conditions. Window wall is engineered and priced per project rather than per unit. Armor Pro provides a free estimate after reviewing your plans and handles measurement, engineering coordination, permitting, and installation.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.