ES Windows ES-U7530 Curtain Wall

The ES-U7530 can be glazed two ways: structural silicone glazing (SSG), where the glass is bonded to the frame for a smooth, near-frameless exterior, available as two-sided or four-sided; or captured glazing, where the glass is held mechanically by pressure plates and caps for visible framing lines. SSG gives a sleeker facade while captured glazing is typically simpler to detail and service. Both carry a design pressure of +50/-50 psf, and we'll help you choose the method that fits the look and budget of your project.

Both the SSG and the captured versions of the ES-U7530 are rated to a design pressure of +50/-50 psf. Because the design pressure a given facade must meet depends on the building's height and wind exposure, we confirm whether that rating suits your specific project against the current product approval before we proceed. We'll verify the ES-U7530's rating works for your opening at quote.

The ES-U7530 is glazed with a 1-inch insulating glass unit built as 1/4-inch tempered glass, a 1/2-inch air spacer, and 1/4-inch tempered glass, which the air space helps with thermal performance. The glass can also be finished with paint, serigraphy, or digital printing for branding or privacy. We'll help you confirm the insulating glass build that fits your facade at quote.

The ES-U7530 frame is available in anodized, painted, and wood-grain finishes as standard, so the framing can match a wide range of architectural looks, including a warmer wood-grain appearance on aluminum. The glass itself can be further finished with paint, serigraphy, or digital print. We'll confirm the available finishes and spec the frame to match your building at quote.

Installed pricing for the ES-U7530 depends on the square footage of facade, whether you choose SSG or captured glazing, the finish, the anchoring details, and the access needed to set the system, so curtain wall is priced per project rather than at a fixed rate. As your installer, Armor Pro handles measurement, engineering coordination, permitting, and code-compliant installation. Contact us for a free, no-obligation estimate and we'll scope your facade and quote it.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.