ES Windows ES-P250 Project Out Window

The ES-P250 reaches a maximum of 60 by 99 inches in all three configurations. The operable casement and awning units are rated to +70/-70 psf, while the fixed version reaches +100/-100 psf. Because the design pressure your opening must meet depends on its size, height, and wind exposure, we confirm the right rating at quote before ordering.

The ES-P250 standard glazing is a 1-inch insulated unit (1/4-inch heat-strengthened, 1/2-inch spacer, 1/4-inch heat-strengthened), and a wide range of insulated and SGP-laminated makeups is available with Low-E coatings and tints. Performance spans roughly U 0.43 to 0.56 on insulated units, with SHGC as low as 0.16 on a Low-E gray makeup and a U of 0.43 / SHGC 0.19 on the argon-filled SB70XL package. We'll match the glass to your solar-control and energy goals at quote.

The ES-P250 casement is side-hinged and the awning is top-hinged, both opening outward (projecting out) for ventilation, and both are rated to +70/-70 psf at up to 60 by 99 inches. The fixed version does not open and carries a higher +100/-100 psf rating at the same maximum size. We'll help you decide which operation fits each opening based on ventilation needs and the pressure your wall must meet.

The ES-P250 is available in anodized, painted, and wood-grain frame finishes as standard. Glass finish treatments include painted, serigraphy, and digital printed options, and tints such as clear, gray, bronze, and solex are offered across the glass packages. We'll show you the finish and tint combinations so the ES-P250 matches your project's design.

Installed pricing for the ES-P250 depends on the window size, the configuration (casement, awning, or fixed), the glass and Low-E package, the frame finish, and the condition of the existing opening, so there's no single price. Armor Pro handles measurement, anchoring (head receptor, sub-sill, or strap anchors), permitting, and code-compliant installation. Contact us for a free, no-obligation estimate and we'll measure your openings and quote the ES-P250.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.