Commercial & Architectural Series
Impact Rating LMI+SMI
Design Pressure +90/-135 psf
ES Windows ES-7500/7600 Window Wall
ES Windows's commercial and architectural glazing — storefront, curtain wall, window wall, and high-pressure impact commercial systems.
A pre-assembled, pre-glazed hurricane-rated curtain-wall/window-wall system delivered ready to install, rated +90/-135 psf with large- and small-missile impact.
Impact Rating LMI+SMI
Design Pressure +90/-135 psf
Impact protection, built for South Florida
The ES-7500/7600 is a pre-assembled, pre-glazed curtain-wall/window-wall system built for the U.S. market and compatible with the ES-9000 impact door. It uses screw-spline construction at a 7" mullion depth, with flush glazing for 9/16" laminated and 1-5/16" insulated-laminated glass up to a maximum size of 48" x 156". The system carries both large- and small-missile impact ratings, a +90/-135 psf design load, and 13.5 psf water infiltration.
- Aluminum frame engineered for strength and durability
- impact-rated laminated glass
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Max Size
48 x 156 in or 60 x 120 in (per panel)
Design Pressure
+90/-135 psf
Impact Rating
LMI+SMI
Frame Depth
7 in
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| ES-7500 Window Wall (LMI) | 48 x 156 in or 60 x 120 in (per panel) | +90/-135 psf |
| ES-7600 Window Wall (SMI) | 48 x 156 in or 60 x 120 in (per panel) | +90/-135 psf |
Options
Related Products
More models in the Commercial & Architectural Series.
Frequently Asked Questions
The ES-7500/7600 is a pre-assembled, pre-glazed curtain-wall/window-wall system from ES Windows' Commercial & Architectural Series that arrives ready to install rather than being built up piece by piece on site. It uses screw-spline construction at a 7" mullion depth with flush glazing, which speeds installation on commercial and mid- and high-rise projects. We install it for U.S.-market jobs where a factory-glazed, hurricane-rated facade unit is preferred over field assembly.
Yes. The ES-7500/7600 is HVHZ-approved and tested for both large-missile and small-missile impact, so we can permit and install it in Miami-Dade and Broward as well as the rest of South Florida. The ES-7500 is the large-missile-impact version and the ES-7600 is the small-missile-impact version. We confirm the exact approval that applies to your opening and building height at quote.
The ES-7500/7600 carries a +90/-135 psf design load with 13.5 psf water infiltration resistance, and each unit can run up to 48" wide by 156" tall. That tall maximum height suits floor-to-floor glazing on multi-story buildings. We size and engineer each unit to your elevation and confirm the required design pressure when we quote.
The ES-7500/7600 is built for two glass packages: a standard 9/16" laminated build (1/4" heat-strengthened + 0.035" SentryGlas + 1/4" heat-strengthened) and a 1-5/16" insulating-laminated package for added thermal performance. The glass can also be finished painted, with serigraphy (ceramic-frit printing), or fully digitally printed. We'll help you choose between the laminated and insulating-laminated options based on your energy and budget goals.
Yes. The ES-7500/7600 is built for the U.S. market and is compatible with the ES-9000 impact door, so the facade and the door system can be integrated on the same project. The framing is offered in alloy 6005-T5 or 6063-T6. We coordinate the window-wall and door details so the assembly works together and meets the approval requirements for your opening.
Installed cost for an ES-7500/7600 window wall depends on the glazed area, the number of pre-glazed units, the glass package you choose, and the building's height and access conditions. Because it is a pre-assembled, engineered facade system, pricing is developed per project rather than as a flat per-unit figure. Armor Pro provides a free estimate after reviewing your elevations and confirms the rating and design pressure for your openings.
This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.
The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.