ES Windows ES-6025 Curtain Wall

The ES-6025's published data shows a +100/-100 psf design pressure but does not list a large-missile impact rating or a Miami-Dade NOA, so we do not present it as an HVHZ impact system. If your project needs impact-rated, HVHZ-approved glazing, ES Windows offers impact curtain wall and window-wall options in the same Commercial & Architectural Series, such as the ES-7525 SS and the pre-glazed impact ES-7500/7600 window wall. We'll confirm the right approved system for your opening and jurisdiction at quote.

Each ES-6025 unit is rated up to about 49-1/4" wide by 83" tall, with a design pressure of +100/-100 psf in single-span, twin-span, and multi-span layouts. Larger glazed elevations are built by combining these spans across the facade. We engineer the layout to your elevation and confirm the design pressure your project requires when we quote.

The ES-6025 offers four standard glazing packages: G1 (1/4" heat-strengthened glass + 0.090" SGP + 1/4" heat-strengthened glass), G2 (a 1/4" tempered + 1/2" spacer + 1/4" heat-strengthened insulating laminated build with 0.060" PVB), G3 (1/2" heat-strengthened + 0.090" SGP + 1/2" heat-strengthened), and G4 (1/4" monolithic glass). The right package depends on whether your project prioritizes laminated security, insulating performance, or a simple monolithic infill. We'll walk you through the trade-offs for your building.

The ES-6025 framing is offered in aluminum alloy 6063 or 6005, and the glass itself can be finished with paint, serigraphy (ceramic-frit screen printing), or full digital printing. That lets the curtain wall match a specific architectural look or carry graphics and patterns across the facade. We'll confirm the available finish and glass-treatment combinations for your design during the quote.

Installed cost for an ES-6025 curtain wall depends heavily on the total glazed area, the number of spans, the glazing package you select, and the elevation's access and structural conditions. Because curtain wall is engineered per project, there is no flat per-window price. Armor Pro provides a free estimate after reviewing your elevations and confirms the system, glass, and design pressure for your opening.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.