ES Windows 2400ST Sliding Glass Door

The 2400ST is approved up to 192 inches wide by 144 inches tall, which is a very large opening for a sliding door, at a design pressure of +131/-131 psf in all four configurations (OX, XO, OXO, and OXXO). The design pressure your specific opening must meet depends on its size, the building height, and the wind zone, so we verify the required rating against your engineering at quote. We'll confirm the 2400ST's rating fits your opening before we order.

The 2400ST is a laminated impact sliding glass door, glazed as standard with a 9/16-inch laminated unit (1/4-inch heat-strengthened, a 0.06 PVB interlayer, and 5/16-inch heat-strengthened glass), which is the impact build used for South Florida coastal work. ES Windows's Commercial & Architectural Series includes U.S.-market HVHZ impact systems alongside non-impact architectural framing, so the HVHZ pathway is product-specific. We confirm the exact approval that applies to the 2400ST and your jurisdiction at quote before we permit.

The 2400ST offers a wide range of glass packages, with clear, gray, and bronze tints plus Solarban SB60 and SB70 low-E coatings, and interlayer choices of 0.06 PVB or a stronger 0.090 SGP. All packages carry a U-factor of 1.03, and the solar heat gain coefficient (SHGC) ranges from about 0.60 on clear glass down to 0.24 on the SB70-over-tint combinations, so you can dial in solar control. Because the frame is a non-thermally-broken aluminum design, we'll help you pick the tint and coating that best balances daylight and heat for your project.

The 2400ST comes standard with a two-point lock and an ergonomic handle and rolls on heavy-duty adjustable tandem polyamide ball-bearing rollers for smooth operation on large panels. An exterior key-locking option is available, along with an insect screen, and the glass can be finished with paint, serigraphy, or digital printing for a custom look. We'll confirm the hardware, screen, and finish choices with you when we build the quote.

The installed price of a 2400ST depends on the size of the opening, the number of panels and the configuration (OX, XO, OXO, or OXXO), the glass package you choose, and the condition of the existing opening. Because it is a large commercial door, Armor Pro provides a free, no-obligation estimate after measuring and reviewing the engineering for your project. We'll confirm the required design pressure and the right configuration before giving you a firm number.

This is ES Windows's house-brand catalog for commercial, condo, and mid- to high-rise architectural work, distinct from the residential tier lines. It covers aluminum storefront, stick and structural-silicone-glazed curtain wall, pre-glazed impact window wall, project-in and project-out operable windows, and commercial sliding and lift-slide doors. We reference it for light-commercial and architectural-spec projects rather than standard home replacement.

The U.S.-market impact systems are the ones that carry real HVHZ ratings: the ES-8860 window wall is tested to plus and minus 150 psf, the ES-6000/6100 sliding door reaches plus 120 / minus 135 psf with multiple Miami-Dade NOAs, and the ES-7500/7600 window wall and several others carry large- and small-missile certification. Some of the metric storefront and curtain-wall framing systems are Latin-American architectural products without Florida approval, so we verify approval status before specifying any of them on a Florida job.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.