PGT EnergyVue Vinyl Preferred View SGD5470NS

No. The SGD5470NS is non-impact, so we don't install it inside the High-Velocity Hurricane Zone where impact glazing is required. It's the non-impact counterpart of PGT's WinGuard SGD5570NS, which is the narrow-sightline impact door we'd specify for HVHZ openings. We'll confirm at quote whether your address requires the impact version.

Individual panels run from a minimum of about 21.4 by 30 inches up to a maximum of 48 by 120 inches, and the door is available as a by-pass or pocket slider with 90-degree corner configurations. Its design pressure rating is +80/-85 psf, which is lower than the wider SGD5470 because of the narrower stile. We'll lay out the panel count and confirm the configuration that fits your opening during the free measure.

On the SGD5470NS we can spec U-factors from 0.34 to 0.38 depending on glass. SHGC drops as low as 0.19 with the Argon/Energy Shield Max package with grids, which helps on sun-exposed patio openings. Glass options run from Energy Shield (U 0.38, SHGC 0.31) up to Argon/Energy Shield Max (U 0.34, SHGC 0.19), and we'll recommend the package that fits your exposure and comfort goals.

The SGD5470NS frame is offered in standard White, Beige, Bronze, and Black, plus two-tone Bronze Exterior/White Interior and Black Exterior/White Interior. For hardware you can choose the standard Raised Handle or upgrade to a Contemporary, Curved, Modern, or Beveled handle. Grid options include 7/8" Traditional Simulated Divided Lite and grids-between-the-glass in 9/16" flat, 13/16" flat, or 1" contour.

Installed price depends on the number of panels, by-pass versus pocket configuration, the glass package, and the opening itself, so there's no flat price for the SGD5470NS. As a PGT installer, Armor Pro provides a free in-home estimate where we measure, lay out the panels, confirm glass and finish, and price the complete installed job. Because this narrow-stile door is non-impact, we'll also verify that your county doesn't require impact glazing for the opening.

No — EnergyVue is a non-impact vinyl line, so it cannot be installed in the High-Velocity Hurricane Zone of Miami-Dade and Broward, and it isn't the right choice for any opening that needs a Notice of Acceptance. It belongs on inland Florida addresses where the building code does not require laminated impact glazing. If you're inside the HVHZ or you want storm protection regardless of jurisdiction, the impact counterpart is WinGuard Vinyl, which uses the same frame.

EnergyVue is the line for projects driven by the energy bill rather than the wind map. It posts the best thermal performance in PGT's residential catalog — U-factors from about 0.27 to 0.32 with the EnergyShield Max Low-E package — which is low enough to move a utility bill and clear ENERGY STAR for the climate zone. The welded vinyl frame also resists salt-air corrosion and never needs repainting. We spec it for inland, energy-focused homes where impact glass isn't required by code.

PGT has built impact windows and doors in Venice, Florida since 1980 and is the largest impact-window and -door manufacturer in the country. It was the first company to develop impact-resistant products that met Miami-Dade County's hurricane code after Hurricane Andrew, and the line is engineered specifically for Florida conditions. PGT is now part of the MITER Brands family, alongside WinDoor, ECO, and NewSouth, but the products are still made in Florida under the PGT name.