Eurocraft

Eurocraft EC-450 Sliding Glass Door

Aluminum impact sliding glass door for residential patios, distinct from the EC-400 casement-door track. FL #47807, LMI+SMI at 120 psf for HVHZ.

Impact Rating LMI/SMI Design Pressure +140/-140 psf Florida Made in Florida

Impact protection, built for South Florida

The EC-450 is Eurocraft's aluminum sliding glass door, a residential SGD configuration distinct from the EC-400's casement-door track. Florida Product Approval (FL #47807, 2023) certifies the EC-450 at 120 psf design pressure with LMI and SMI impact ratings for South Florida coastal installations.

  • Florida Building Code product-approved
  • Aluminum frame engineered for strength and durability
  • impact-rated laminated glass
  • Energy-efficient Low-E insulated glass options to control heat gain
  • Corrosion-resistant finishes for coastal applications
  • Professionally installed across South Florida by Armor Pro
Configurations X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Sliding Glass Door (per-panel rated)
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Energy Efficient
Low-E insulated glass options reduce heat gain
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship

At a Glance

Frame Material Aluminum
Max Size 72 x 144 in (per panel)
Design Pressure +140/-140 psf
U-Factor 0.76–1.1
SHGC 0.19–0.53
Visible Trans. 0.22–0.59

Sizes & Pressures

Configuration Max size Design pressure
Sliding Glass Door (per-panel rated) 72 x 144 in (per panel) +140/-140 psf

Glass & Energy Performance

Glass packageU-FactorSHGC VT CR
9/16" laminated (SG)1.0610.32 0.361 16
1-3/16" insulated laminated (SG)0.7620.292 0.358 17

Performance Certifications

Florida Building Code Product Approval NFRC Certified energy ratings
  • FL DBPR FL47807

Options

Glass tint
Clear (standard)GreenGrayBronzeAzure BlueWhite (privacy)

Ready to install the Eurocraft EC-450 Sliding Glass Door?

Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.

Frequently Asked Questions

The EC-450 is Eurocraft's aluminum impact sliding glass door, a dedicated residential SGD configuration that's distinct from the EC-400's casement-door track. It's built for residential patio openings in South Florida's coastal areas. We help homeowners choose between the two based on the opening size, the design pressure required, and how the door needs to coordinate with the rest of the home.

Yes. The EC-450 carries Florida Product Approval FL #47807 (2023) with LMI and SMI impact ratings, so it's approved for High-Velocity Hurricane Zone installations in Miami-Dade and Broward. It's certified for coastal South Florida use, and we'll confirm the specific approval and rating that applies to your opening when we quote the job.

The EC-450 is per-panel rated to a maximum panel size of 72 by 144 inches, which makes it a good fit for tall, wide patio openings. The largest configuration carries a design pressure of +140/-140 psf. We'll verify the exact rating for your panel sizes and your site's wind-load requirements before we install.

The EC-450 comes with 9/16-inch laminated impact glass rated U-factor 1.09, SHGC 0.40, VT 0.32, or a 1-3/16-inch insulated laminated package at U-factor 0.76, SHGC 0.46, VT 0.53 for better thermal performance. Across the available glazing the door spans a U-factor range of roughly 0.76 to 1.1 and SHGC of 0.19 to 0.53. We'll recommend the package that best balances energy savings and your design pressure needs.

The EC-450 frame is offered in White (standard), Bronze, and Clear Anodized. Glass tints include Clear (standard), Green, Gray, Bronze, Azure Blue, and a White privacy option. We'll go over the finish and tint choices so the slider matches your home's other windows and doors.

The installed price of an EC-450 depends on the panel sizes, the glass package, and the condition of your existing opening. Because it can run up to 72 by 144 inches and offers both laminated and insulated laminated glazing, the right build varies by project. Armor Pro provides a free estimate after measuring the opening and confirming the design pressure your location requires.

Eurocraft USA is an independent, family-owned manufacturer based in the Miami area, run by the Mujica family with more than 30 years building impact windows and doors. Unlike many Florida brands that are owned by larger national groups, Eurocraft is its own company. It builds an aluminum impact line and a European-style uPVC line, all certified for Florida. Armor Pro installs and services Eurocraft across Miami-Dade, Broward, and Palm Beach.

Eurocraft's aluminum side is its EC series, covering the standard Florida operation styles: fixed and architectural-shape windows (EC-100), single hung (EC-200), horizontal sliders (EC-300), casement and awning (EC-700), commercial storefront (EC-500), plus aluminum sliding glass doors (EC-400 and EC-450), a commercial French door (EC-600), and an outswing entry door (EC-650). Alongside that it builds a European-style uPVC line, a fixed window, a tilt-and-turn window, a French/swing door, and the Premidoor 88 lift-and-slide. We help you pick the series that fits each opening rather than steering you to one product.

A sliding glass door (SGD) glides on a bottom track and stacks panels to one side, giving a wide glass opening to a patio or lanai. The impact version uses laminated glass and a heavy reinforced frame tested to the HVHZ standard, so it protects the largest opening in most homes without needing shutters.

Protect your home with Armor Pro Windows & Doors!

Call (954) 231-7164 or Get Started Online with a Free Estimate!