ES Windows Prestige ES-8000T Jumbo Storefront

Sizes scale with the configuration: a single lite goes up to 84 by 180 inches, a single frame with two lites up to 102 by 169.75 inches, and a multiple two-lite frame up to 305.125 by 135.75 inches wide. Every configuration in the catalog is rated to 70 psf positive and 70 psf negative design pressure. We confirm the exact size and the design pressure your opening must meet at quote.

It runs a 1-1/8 inch insulated laminated unit available with PVB or SentryGlas (SGP) interlayers, in clear, gray, and bronze tints and with SB60 or SB70 low-E coatings. Clear non-low-E make-ups carry a U-factor around 0.58 with SHGC up to about 0.60 and VT to 0.65, while the SB60 and SB70 low-E packages drop the U-factor to roughly 0.45 and the SHGC into the 0.18 to 0.34 range for stronger solar control. Condensation resistance runs 53 to 54 across the packages, and we will recommend the make-up that best balances daylight and heat control for your home.

The ES-8000T Storefront comes in standard anodized and painted aluminum finishes, and as a Prestige product it can also be ordered in the line's wood-grain palette. The glass itself can be ordered with painted, serigraphy, or digital-print finishes for spandrel or decorative effects. We help you match the frame finish and any glass treatment to the building's design.

The ES-8000T Storefront is glazed with insulated laminated glass, which is the same laminated construction used in impact systems, and it sits in ES Windows's Prestige impact line. We verify the exact impact and product approval for the storefront configuration you are ordering before we permit, rather than assume a rating. If your opening needs an operable, HVHZ-certified unit, the companion ES-8000T jumbo casement is the alternative we can quote alongside it.

There is no flat price because the ES-8000T Storefront scales from a single lite to a 25-foot-wide multi-lite frame, and cost depends on the size, the glass package, the finish, and the existing opening. Large storefront glass also affects handling and installation labor. Contact Armor Pro for a free estimate and we will measure the opening and quote the ES-8000T Storefront for you.

Yes. Prestige is ES Windows's premium aluminum impact line and carries Miami-Dade NOAs across its windows and doors for HVHZ use in Miami-Dade and Broward, including thermally broken variants. Exact design pressures depend on the product and opening size, which we confirm against your address before ordering.

Prestige is built around large-format and statement openings: the PSD5030 pivot door (a 2024 Glass Magazine award winner), the FX3050 folding door with panels up to roughly 8 by 16 feet, the 16-panel BF5010T bi-fold, and impact sliding glass doors. These are the openings homeowners want to disappear, and Prestige is engineered to make them disappear while keeping an HVHZ impact rating. We size and configure the door system to your opening during the consultation.

ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.