Eco-Guard Commercial Storefront Series
Florida DBPR
Approved
Impact Rating LMI
Design Pressure +70/-75 psf
Made in Florida
Eco-Guard 850 Storefront Door
Impact storefront windows and doors for South Florida commercial ground floors.
Storefront door in the 800/810 family; the public product page is an unfinished stub (specs not published). FL approval lists a Series 845 outswing entrance door under FL39630.
Florida DBPR
Approved
Impact protection, built for South Florida
- Florida Building Code product-approved
- Aluminum frame engineered for strength and durability
- Large-missile impact-rated laminated glass
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Configurations
X = operable panel (it opens) · O = fixed panel (doesn’t open). Panels read left‑to‑right as viewed from outside (hung windows read top‑to‑bottom). Example: XO = operable on the left, fixed on the right.
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Max Size
39.813 x 108 in (per panel)
Design Pressure
+70/-75 psf
Impact Rating
LMI
Sizes & Pressures
| Configuration | Max size | Design pressure |
|---|---|---|
| Single Out-Swing (X) | 39.813 x 108 in (per panel) | +70/-75 psf |
| Double Out-Swing (XX) | 76 x 108 in (per panel) | +70/-75 psf |
Performance Certifications
- FL39630
Options
Ready to install the Eco-Guard 850 Storefront Door?
Armor Pro measures, permits, and installs it across South Florida — code-compliant and warrantied. Get a free, no-obligation estimate.
Frequently Asked Questions
The Eco-Guard 850 is an aluminum impact storefront door in ECO's 800/810 commercial family, used on impact-rated commercial ground floors and tenant spaces. ECO's published product page for the 850 is currently a stub, but the Florida approval lists a Series 845 outswing entrance door under FL39630. We install it where a commercial-duty impact door is needed and we'll confirm the exact configuration and current specs with ECO at the time of quote.
Yes. The Series 850 is a large-missile-impact (LMI) and small-missile-impact (SMI) rated aluminum door and is HVHZ-approved under Florida Product Approval FL39630, so it is eligible for Miami-Dade and Broward's High Velocity Hurricane Zone. We confirm the approval and the design pressure that apply to your specific configuration before installation.
The single out-swing (X) configuration goes up to 39.813 by 108 inches, and the double out-swing (XX) pair goes up to 76 by 108 inches. Both are rated to a design pressure of +70/-75 psf. We measure your opening and confirm whether a single or double leaf fits best during the quote.
The Series 850 storefront door is rated to a design pressure of +70/-75 psf in both its single and double out-swing configurations. That's a lower DP than the +80/-80 psf 800 and 810 doors, so the right model depends on the wind load your opening requires. We verify the required and rated design pressure for your project at quote.
The Series 850 is glazed with a 7/16-inch laminated makeup using 1/4-inch heat-strengthened lites and a .090-inch Trosifol PVB interlayer as the standard package. That laminated build is what provides the impact protection required for HVHZ entries. We'll confirm the available glazing options with ECO for your specific door at quote.
We don't quote a flat price because installed cost depends on whether it's a single or double leaf, the size of the opening, the hardware, and the condition of the existing frame. As a commercial-duty impact storefront door, it's specified differently from a residential entry door. Armor Pro provides a free, no-obligation estimate after measuring your opening.
Storefront is a heavier-walled aluminum system built for the larger spans, higher duty cycles, and code requirements of commercial ground floors and mixed-use buildings, where a residential window would run out of span or rating. ECO's commercial line includes the 5-inch Series 400 window-wall, the lighter 4-inch Series 450 Frontset, and matching storefront doors. We use these where a project's openings, occupancy, or door traffic call for a commercial assembly.
Yes. The storefront windows (Series 400, 450) and doors (Series 800, 810) use Eco-Guard laminated impact glass on aluminum and carry large-missile and small-missile impact approval, eligible for Miami-Dade and Broward HVHZ installation. The windows run under Florida Product Approval FL21632 and the doors under FL39630, with the Series 400 reaching about +80/-130 psf. We confirm ratings against the project's structural calcs on the quote.
Yes. ECO's residential aluminum impact lines carry Miami-Dade Notices of Acceptance and Florida Product Approvals, which makes them eligible to install in the High-Velocity Hurricane Zone (Miami-Dade and Broward counties). The exact wind ratings depend on the specific series, size, and configuration, so we confirm the right product for your opening on the quote. We pull the permit and submit the approval documents as part of every job.



