Railing & Guardrail Systems
Impact Rating LMI
Design Pressure +145/-145 psf
Glazing 3/8 in insulating glass
ES Windows ES-RG110 Railing Gate
ES Windows's structural glass railing, guardrail, windscreen, and balcony-divider systems.
Hurricane-resistant adaptable glass railing-gate system, factory pre-assembled and pre-glazed with concrete-embedded posts; designed for the US market at design loads up to…
Impact Rating LMI
Design Pressure +145/-145 psf
Glazing 3/8 in insulating glass
Impact protection, built for South Florida
The ES-RG110 is a hurricane-resistant railing gate ("barandales") system that ships factory pre-assembled, with its posts embedded and hinges installed to receive the door panel, and is compatible with a wide range of railing systems. It is explicitly designed for the US market and engineered for 3/8-inch insulating glass. Rail-cap depth runs 5 1/2 to 6 1/4 inches over a 2-inch sight line and a 3 1/2-inch frame depth, supporting design loads of plus/minus 145 PSF. The system is concrete-embedded, ready to install, supports corner configurations, and is offered in anodized, painted, and wood-grain finishes.
- Aluminum frame engineered for strength and durability
- Large-missile impact-rated laminated glass
- Corrosion-resistant finishes for coastal applications
- Professionally installed across South Florida by Armor Pro
Impact Protection
Tested to withstand hurricane wind-borne debris
Engineered Strength
Built and tested to Florida product-approval standards
Corrosion Resistant
Coastal-grade finishes for salt-air durability
Limited Warranty
Manufacturer warranty plus Armor Pro install workmanship
At a Glance
Frame Material
Aluminum
Design Pressure
+145/-145 psf
Impact Rating
LMI
Frame Depth
3.5 in
Sizes & Pressures
| Configuration | Design pressure |
|---|---|
| Standard configuration | +145/-145 psf |
Related Products
More models in the Railing & Guardrail Systems.
Frequently Asked Questions
The ES-RG110 is a hurricane-resistant glass railing-gate (barandales) system that gives you a working, hinged gate opening within a run of glass railing, so you can close off a balcony, terrace, pool deck, or stair landing while keeping the same glass-rail look. It ships factory pre-assembled and pre-glazed, with the posts already embedded and the hinges installed to receive the door panel. We install the ES-RG110 where a property needs a code-rated gate built into its guardrail rather than a fixed railing alone.
Yes. The ES-RG110 carries a Large Missile Impact (LMI) rating and is engineered specifically for the US market at design loads up to plus or minus 145 PSF, which suits exposed coastal balconies and terraces. Note that the profile does not list it as HVHZ-approved, so for projects inside the Miami-Dade and Broward High-Velocity Hurricane Zone we confirm at quote whether the ES-RG110 or a different ES Windows railing carries the approval your jurisdiction requires.
The ES-RG110 is built to a design pressure of plus or minus 145 PSF, the wind load it is engineered to resist, and it is designed for 3/8-inch insulating glass. The frame depth is 3 1/2 inches with a 2-inch sight line and a rail-cap depth running 5 1/2 to 6 1/4 inches. Because the rating your opening must meet depends on its height, exposure, and location, we confirm the required design pressure at quote.
Yes. The ES-RG110 supports corner configurations and is compatible with a wide range of railing systems, so it can be tied into the surrounding glass railing rather than installed as a standalone gate. Because the posts are concrete-embedded and the system ships ready to install, we plan the embed locations and any corners during measurement so the layout works for your balcony or terrace.
The ES-RG110 is offered in anodized, painted, and wood-grain finishes, so the gate can match the rest of your railing and your home's exterior. Wood-grain gives the aluminum the look of wood while keeping the structural and corrosion performance of the metal. We will go over the finish options with you so the gate and adjoining railing are consistent.
Installed pricing for the ES-RG110 depends on the size of the gate and surrounding railing run, the finish, whether corners are involved, and the condition of the slab where the posts are embedded, so there is no single price. Because the system is concrete-embedded, proper layout and anchoring are part of a code-compliant installation that we handle. Contact us for a free, no-obligation estimate and we will measure the opening and quote the ES-RG110.
It is ES Windows's structural glass railing catalog: modular post and postless glass guardrails, a railing-gate system, glass windscreens (cortavientos), floating-glass railings, and balcony dividers. The systems ship factory pre-assembled and pre-glazed and are designed to be embedded in concrete or grout. We reference them mainly on coastal balcony, terrace, and rooftop-amenity projects.
Several members are impact-tested for coastal use; the ES-RG110 railing-gate, for example, is engineered for design loads up to plus and minus 145 psf, and the windscreen and some guardrail systems carry large- and small-missile testing. Because approval coverage can be configuration-dependent, we verify the specific rating and any Florida or Miami-Dade approval against your project's location and railing height before specifying.
ES Windows is the residential and light-commercial fenestration brand of Tecnoglass Inc. (NYSE: TGLS), and the products are manufactured at the company's complex in Barranquilla, Colombia. What makes the brand unusual is that the parent makes its own architectural glass and aluminum extrusions and then assembles the finished windows and doors in-house, so a single company stands behind the whole assembly rather than buying glass and frames from outside suppliers. We install and service ES Windows products throughout South Florida.